Triax 260s flash write error message

cfphoenix

Regular Member
Messages
215
Likes
0
My Satellite Setup
Dreambox 7020S; DBox2 DVB-C; 1.1m Triax twin LNB for Astra & Hotbird; 90cm Sky dish for Hispa; 4-way Diseqc
My Location
Belfast
#1
Hello mates

I have a Triax 260s which was working fine until I decided to update the firmware by using the serial loader software and firmware from triax's website.

The error message I now receive is E 1.04 and it stucks on boot.

I have tried to flash it about 10 times again and I got the same message ie. flash write error and software upgrade fail !!! - see attached.

Also, if the box's bootloader is corrupt, what are my options with Triax? e.g. repair, upgrade to triax 272s. They should not supply software which are going to mess good systems!!

Please help.

Thank you.
 

Attachments

Topper

Amo Amas Amant Admin
Staff member
Messages
21,780
Likes
3,321
My Satellite Setup
IDD CI24 ECONO MM Penta 1.20 Galaxy II
1.2Mtr Polar MTG yes it has been on the arc for 25 years and is now fixed on 13 East using two pairs of rusty molegrips. Unlike me they never groan but always perform.
My Location
Blackburn, Lancashire
#2
I would recommend contacting them as I am sure you are not the first.
 
Top