cfphoenix
Regular Member
- Joined
- Aug 11, 2004
- Messages
- 215
- Reaction score
- 0
- Points
- 0
- Age
- 49
- My Satellite Setup
- Dreambox 7020S; DBox2 DVB-C; 1.1m Triax twin LNB for Astra & Hotbird; 90cm Sky dish for Hispa; 4-way Diseqc
- My Location
- Belfast
Hello mates
I have a Triax 260s which was working fine until I decided to update the firmware by using the serial loader software and firmware from triax's website.
The error message I now receive is E 1.04 and it stucks on boot.
I have tried to flash it about 10 times again and I got the same message ie. flash write error and software upgrade fail !!! - see attached.
Also, if the box's bootloader is corrupt, what are my options with Triax? e.g. repair, upgrade to triax 272s. They should not supply software which are going to mess good systems!!
Please help.
Thank you.
I have a Triax 260s which was working fine until I decided to update the firmware by using the serial loader software and firmware from triax's website.
The error message I now receive is E 1.04 and it stucks on boot.
I have tried to flash it about 10 times again and I got the same message ie. flash write error and software upgrade fail !!! - see attached.
Also, if the box's bootloader is corrupt, what are my options with Triax? e.g. repair, upgrade to triax 272s. They should not supply software which are going to mess good systems!!
Please help.
Thank you.