Triax TD 110 and Arabsat 30.5 E

nilefish

Regular Member
Messages
75
Likes
0
My Satellite Setup
DB 500 S,Strong 4622, Viasat Denmark card and receiver, Moteck 2100 Motor, Triax1.1 dish, infinty programmer, cas interface2.
My Location
South London
#1
Hi

I would like to view some channels on Arabsat 30.5e , like Blue Nile Channel forexampel , I had 90 cm dish the I ugrade to 1 m and I found out at last that Triax TD 110 can get Arabsat 26 E , but can I view 30.5e as well ? and is it better to buy Fortec star or Channel Master 1.2 ? any ideas please ? I have already 2 dishes at home and I wanna get it right this time.
I'm located in South London and my longitude is 51.5
 
Messages
5
Likes
0
My Satellite Setup
:
#2
Imposible to receive 30.5e in the uk the beam doesnt come anywhere near. you are best sticking with 26e
 

nilefish

Regular Member
Messages
75
Likes
0
My Satellite Setup
DB 500 S,Strong 4622, Viasat Denmark card and receiver, Moteck 2100 Motor, Triax1.1 dish, infinty programmer, cas interface2.
My Location
South London
#3
WebLoch said:
Imposible to receive 30.5e in the uk the beam doesnt come anywhere near. you are best sticking with 26e
Thanks for replying ..which dish is better for 26e ? Triax TD110 or Fortec star / Channel master 1.2 m ? as I said I wanna get it right this time

Mnay Tanks
 

Lancelot

Specialist Contributor
Messages
3,638
Likes
8
My Satellite Setup
SS1.
125cm Gibbi with Channelmaster feedhorn and Inverto C120 twin.
36v H to H 62E - 61.5W
My Location
South central
#4
The Channel Master 1.2 is the best of those you mention, more expensive than the other two but worth it.
 

nilefish

Regular Member
Messages
75
Likes
0
My Satellite Setup
DB 500 S,Strong 4622, Viasat Denmark card and receiver, Moteck 2100 Motor, Triax1.1 dish, infinty programmer, cas interface2.
My Location
South London
#5
Lancelot said:
The Channel Master 1.2 is the best of those you mention, more expensive than the other two but worth it.
Thanks that's what I wanna know , and hopfuly it's not heavy for my motor
 

Lancelot

Specialist Contributor
Messages
3,638
Likes
8
My Satellite Setup
SS1.
125cm Gibbi with Channelmaster feedhorn and Inverto C120 twin.
36v H to H 62E - 61.5W
My Location
South central
#6
Hopefully not, but if you are in an exposed location then it may not last too long as DiSEqC motors are better off turning things of less than a metre in diameter.


L.
 

steffan_st

A bit enthusiastic
Messages
573
Likes
13
My Satellite Setup
Gibertini OP 125 L, Smart Titanium lnb with CD-80 feedhorn, Moteck SG-2500, Azbox HD Premium+, some 5 meters of good quality coax
My Location
Sweden
#7
The Channel Master is a VERY heavy dish.
 

nilefish

Regular Member
Messages
75
Likes
0
My Satellite Setup
DB 500 S,Strong 4622, Viasat Denmark card and receiver, Moteck 2100 Motor, Triax1.1 dish, infinty programmer, cas interface2.
My Location
South London
#8
steffan_st said:
The Channel Master is a VERY heavy dish.
That's good to know I better go for the Triax then , I don't wanna buy the dish and then change the motor , it will b not ending story
 

steffan_st

A bit enthusiastic
Messages
573
Likes
13
My Satellite Setup
Gibertini OP 125 L, Smart Titanium lnb with CD-80 feedhorn, Moteck SG-2500, Azbox HD Premium+, some 5 meters of good quality coax
My Location
Sweden
#9
You can't use your SG-2100 with a Channel Master.
If you have a GOOD 1m dish now you will see an improvement of about 15-20% on your receivers pic-quality meter if you choose the Triax.
Remember that the Triax is not a "true" 110cm.
 

nilefish

Regular Member
Messages
75
Likes
0
My Satellite Setup
DB 500 S,Strong 4622, Viasat Denmark card and receiver, Moteck 2100 Motor, Triax1.1 dish, infinty programmer, cas interface2.
My Location
South London
#10
steffan_st said:
You can't use your SG-2100 with a Channel Master.
If you have a GOOD 1m dish now you will see an improvement of about 15-20% on your receivers pic-quality meter if you choose the Triax.
Remember that the Triax is not a "true" 110cm.
Can I get all the channels on Arabsat 26e with the Triax any idea?
 

steffan_st

A bit enthusiastic
Messages
573
Likes
13
My Satellite Setup
Gibertini OP 125 L, Smart Titanium lnb with CD-80 feedhorn, Moteck SG-2500, Azbox HD Premium+, some 5 meters of good quality coax
My Location
Sweden
#11
nilefish said:
Can I get all the channels on Arabsat 26e with the Triax any idea?
Can't answer that one since I'm in Sweden,you have to ask the lads at your location.
 

Likvid

ASBO Club Member - Persona non grata
Messages
1,752
Likes
5
My Location
Stockholm, Sweden
#12
I would choose a Gibertini 100cm any day.

As said the Triax is not 110cm but maybe around 105cm.

Channel Master is hard to find as they don't exist under that brand anymore, it's Andrew today.

Real price on the Andrew Type120(Channel Master 1.2) is around 170 Euro retail that i pay.

Polar mounts are not manufactured anymore for the Channel Master, you might find old Channel Master stock somewhere.

Otherwise, buy the Jaeger SMR1224.

I get Gibertini OP120 for 99 euro.
 

nilefish

Regular Member
Messages
75
Likes
0
My Satellite Setup
DB 500 S,Strong 4622, Viasat Denmark card and receiver, Moteck 2100 Motor, Triax1.1 dish, infinty programmer, cas interface2.
My Location
South London
#13
Likvid said:
I would choose a Gibertini 100cm any day.

As said the Triax is not 110cm but maybe around 105cm.

Channel Master is hard to find as they don't exist under that brand anymore, it's Andrew today.

Real price on the Andrew Type120(Channel Master 1.2) is around 170 Euro retail that i pay.

Polar mounts are not manufactured anymore for the Channel Master, you might find old Channel Master stock somewhere.

Otherwise, buy the Jaeger SMR1224.

I get Gibertini OP120 for 99 euro.
Thanks for explanation it's the first time to hear about this dish Gibertini -sorry I'm new to all this- and this is review I found

1 Metre Gibertini dish even performed better than the 1.1 Triax and the 1 Metre High Gain dish we used to sell it's the most popular dish we sell -

I think I will go for thaht


 
Top