Triax td88

[age123]

hi guys i have a Triax td88 dish and a golden interstar dsr-8001 premium satellite receiver, i have tried everything but my power stays at 75 and the quailty stays at 63 i am trying to pick up hotbird but no pic what so ever

what could be wrong does any 1 now please post asap

many thanks age123

 

[Lancelot]

What does your LNB setup menu say.
Have you had this setup working before on another satellite ?

L.

 

[age123]

yes it says universal and this is a new setup 4 me i have no clue

 

[twag42]

try adjusting the elevation a little and maybe also moving the dish slightly east or slightly west.it sounds to me that with a little bit of fine tuning you should be able to pick up maximum signal. GOOD LUCK!!

TWAG

ps- let us know how you get on

 

[age123]

also it it possble 2 pick up any channels with out a cam

 

[Lancelot]

Can you check the settings -

LNB power on, LOF1 9750 LOF2 10600 switch 11700 . If all OK then disconect your LNB cable after switching off first and then switch on again and see what you are getting.

L.

 

[age123]

also my cam says dream load what does that mean

 

[age123]

LOF1 what does this mean and were can i find it on my setup please

 

[Lancelot]

Remove all CAM's an cards first then turn your box back on again.
Your LNB settings should be in the menu .

L.

 

[age123]

ok i am on hotbird channel and my lnb is set 2 9750 now what do i do next please

 

[age123]

also my cam is broke were can i find firmwere that works

 

[Lancelot]

Right - are you sure you are on hotbird ?

Also the LNB settings (there are 3 that need to be set, 9750 10600 11700) in the menu need to be set like that.

If you are sure of these two things then try to look at some hotbird channels and you should get something. Have a look at 12597V 27500, BBC World should be there in the clear.


L.

 

[age123]

i have only set 9750 how do i set up the other two? please

 

[Lancelot]

You should be able to set your LNB to Universal and see the results displayed as written above. Dont worry about the CAM until you have the reciever working.


L.

 

[age123]

hang on we are going 2 post some pic maybe it will help a bit more

 

[age123]

i set the frequency to 12597V 27500 but it changes soon as i exit the menu

 

[Lancelot]

Hmmm -
Cant drive one of those but surely there is an option to scan 1 transponder in the menu somewhere ?

Have you tried all the channels in the hotbird menu on your reciever?
What does the blurb say about manual transponder scan ?

Also - sorry mate to go back to basics are you sure you are on 13e?

L.

 

[age123]

sorry mate not sure but i am a newbie at this is there any way i can email u a pic as the are too big 2 up load

 

[Lancelot]

You should be able to upload a sizeable file here easily.
Make sure it is a JPEG and not a Bitmap .

L.

 

[age123]

dont matter look at my links

http://i21.photobucket.com/albums/b259/age123/PICT0140.jpg and

http://i21.photobucket.com/albums/b259/age123/PICT0138.jpg