Trouble wiring a quadplex! Can you help?

A

Avago

Member
My Satellite Setup
Sky HD!
My Location
Midlands
My digital installers have left 4 wires, each a brick apart and looking a mess with about 10ft of coax on the inside. I want to tidy it all up so I've bought a Labgear quadplex with Twin F satellite and Twin coaxial TV, DAB and return (PSW351T/S). Now I've come to wire it up the back is labelled SAT2 and TRIPLEXED. What wire goes in where? I have 2 x satellite wires, an in TV ariel and a return ariel.

Hope you can help.
 
A triplexd plate won't do you much good, as all the signals are on seperate cables. That triplexed bit of that plate seperates Satellite, Terrestrial and FM from a single cable. The Sat2 is a straight through connection. Probably toe best solution for you to tidy it all up would be to get a Double Gang modular face plate, and 2x F-Connector Modules and 2x Beling Lee Modules, or even 4x F-Connector Modules, and make up fly leads to suit. 2 of them f-f and the other two f - belling lee.
 
I will get the plates today. I would use professionals but have been let down v badly on the last few occasions. If there was a site for recommendations in each area of the UK it would be fantastic for the legitimate workers. Sky seem to appoint some real cowboys!
 
Back
Top