viacess cam

den123

Regular Member
Joined
Feb 3, 2007
Messages
301
Reaction score
16
Points
18
Age
71
My Satellite Setup
ddcccccc
My Location
uk
if i get a cam will it have to be programed or anythin or can i just put a viacces card in it to work new to this lot cans ect thanks guys :confused
 

Zorba

Regular Member
Joined
Jun 13, 2003
Messages
2,201
Reaction score
7
Points
38
Age
63
My Satellite Setup
3m(28.2E),1.5m(19.2E.13E,10E),1m (4W ,7W)1m (?).diseqc 10,sky plus,VU+,telergy iptv.
Satlook nit colour + Horizon hdsm.
My Location
Limassol, Sunny Cyprus
Just stick the card in.Make sure its the latest version cam.
 

den123

Regular Member
Joined
Feb 3, 2007
Messages
301
Reaction score
16
Points
18
Age
71
My Satellite Setup
ddcccccc
My Location
uk
if its not the latest version can i upgrade it to the latest version its a red cam thanks whats the latest virsion
 

CROSSBONES

Specialist Contributor
Joined
Jul 23, 2005
Messages
2,009
Reaction score
192
Points
63
My Satellite Setup
1.2m channel master on a jeager 1224 motor. 55cm fibo Gregorian. VU solo2.
My Location
S.Wales
A black cam is viaccess 1 and TPS crypt.

Software exists however to switch it to Conax and we have heard of this being converted to Cryptoworks too (can't be programmed via laptop)

Red cam is viaccess 1 & 2.

P/N : 901273 ) V 477 Rev. 1.0 Ver. 1.0
( P/N : 901273 ) V 478 Rev. 1.1 Ver. 1.0( P/N : 902513 ) V 481 Rev. 1.0 Ver. 1.0( P/N : 902532 ) V 481 Rev. 1.0 SCA: 001
( P/N : 903182 )
Viasat Sweden on Nokia 9321S
( P/N : 903457 ) V 483
Software exists however to switch it to Aston Ver. 1.05 and Irdeto II (can't be programmed via laptop)​
Ver. 4.77, Ver. 4.78, Ver. 4.81 or Ver. 4.83 cannot be upgraded to Ver. 1.10 and Ver. 1.20 due to difference in Chips. Any attempt to do so will resolve in destruction of your Module

 

kadnor

Member
Joined
May 22, 2004
Messages
28
Reaction score
0
Points
1
Age
91
CROSSBONES said:
A black cam is viaccess 1 and TPS crypt.
Software exists however to switch it to Conax and we have heard of this being converted to Cryptoworks too (can't be programmed via laptop)

Red cam is viaccess 1 & 2.

P/N : 901273 ) V 477 Rev. 1.0 Ver. 1.0
( P/N : 901273 ) V 478 Rev. 1.1 Ver. 1.0( P/N : 902513 ) V 481 Rev. 1.0 Ver. 1.0( P/N : 902532 ) V 481 Rev. 1.0 SCA: 001
( P/N : 903182 )
Viasat Sweden on Nokia 9321S
( P/N : 903457 ) V 483
Software exists however to switch it to Aston Ver. 1.05 and Irdeto II (can't be programmed via laptop)​
Ver. 4.77, Ver. 4.78, Ver. 4.81 or Ver. 4.83 cannot be upgraded to Ver. 1.10 and Ver. 1.20 due to difference in Chips. Any attempt to do so will resolve in destruction of your Module
Good Morning,
I have read this message and would be most grateful if you will kindly study the possibility of giving me your advice as in what ways I can modify my Simba 202 S V2 (witn embedded Viaccess 2.5 & Mediaguard 2) .I am prepared to give you the applications and version etc- upon your request.

I am living in the small island of Mauritius(Indian Ocean) 57.5* East/20.23* South. Because we are under the equator, there are not so many transponders pointing southwards( W 3, W 2, W.4,Panamasat 10).

Which sites you would recommend me to visit to get a broader knowledge.

Thank you in anticipation for your e-reponse.

Best Wishes,

youtrs respectfully,

kadnor( member of this forum).
 

Llew

cerca trova...
Staff member
Joined
Jan 1, 2000
Messages
16,226
Reaction score
4,197
Points
113
Age
81
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
Try _www.aston-team.net/ for applications, JTAG instructions etc.

Llew
 
Top