• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

VxMulti 9-Mode Programmer

D

Doozer

Guest
#1
Hi People!

Just purchased a VXMulti 9-Mode Programmer.
Having problems with the new supplied VXCardmaster 7.04 (Mode 7)software that was supplied with the device - Basically it programs and verifies the goldcard or Atmel card all ok but when inserted into my receiver (Humax 5300) it does not recognise it.

I can program a goldcard perfectly everytime using the 'old' VxMulti Software (Mode 8) supplied on floppy disk but this does not let you program the Atmel 256k Funcards.

Any help much appreciated.

Thanks,

Doozer.
 

nobbly

Regular Member
Messages
321
Likes
0
My Location
Not in UK
#2
If you have a look at the Vxtools web site http://www.vxtools.com/support/downloads.htm
you will see that the VxCardmaster 7.04 is only for the VxMicro programmers and will not work with the VxMulti.

You could try Chipcat 2.3 http://www.wizards.sh1te.net/techbase/smart/chipcat23.zip

The software will ask for you to set your programmer to the correct setting but remember that this software is not for the Vxmulti and the numbers are not the same.
i.e when it asks for mode 1 (amtel mode) you set your VXmulti to numer 4 and mode 0 is the same in both (SMARTCARD 6MHz)

Other programmers

-Mode0: SMARTCARD 6MHz (MULTIMOUSE Emulation)
-Mode1: ATMEL 4MHz (SI PROG, HARPUNE Emulation)
-Mode2: PIC (LUDIPIPO, JDM Emulation)
-Mode3: **in the future** GSM, Insurance card, Tel.Card
-Mode4:
-Mode5: SMARTCARD 3,57MHz (MULTIMOUSE, PHOENIX Emulation)
-Mode6: SMARTCARD 3,68MHz (MULTIMOUSE ESPANIA Emulation)
-Mode7:


Vxmulti

0 - 6.00Mhz Smartmouse
1 - 3.57Mhz Smartmouse
2 - Ludipipo PIC
3 - Ludipipo Eeprom
4 - Atmel
5 - 6.00Mhz Phoenix
6 - 3.57Mhz Phoenix
7 - Millennium
8 - Vxmini-4


nobbly :+
 
D

Doozer

Guest
#3
Cheers Nobbly,

Thanks for the advise. Tonight I may get to program my first 256k Atmel card if I can find some files!

Regards,

Doozer.
 

nobbly

Regular Member
Messages
321
Likes
0
My Location
Not in UK
#4
You can also try Cardwriter 1.87
http://64.23.80.81/settings/index.html

Also a "how to" program

nobbly :+

P.S. let us know where you get your files from. could be interesting ......
 

BARF

Member
Messages
6
Likes
0
#5
Doozer, do you still have the software for the VX Multi? If so, contact me via PM - I'm desperate for it PLEASE!
 

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,652
Likes
1,272
My Satellite Setup
See signature
My Location
Berkshire
#6
Very doubtful whether doozer will respond, as he hasn't been a member for 6 years, about the time he posted this thread.