Advice Needed What is best

Adam792

Adam792

Specialist Contributor
Messages
564
My Satellite Setup
Dishes: 80cm (5°W/4.8°E), 80cm (30°W), 60cm Zone 2 (13°E/19.2°E/28.2°E)
Receivers: HTPC (Intel i3 processor, nVidia Graphics, and TBS6905 4x DVB-S2 PCIe tuner card) running Ubuntu with Kodi/TVHeadend, Wetek Play2, Skybox M3.
My Location
Worcester
Yes I've been playing around with this, if you edit the satellites.xml and other things the box just default them back to what they were.
I think what they are doing is emulating the E2 satellite config settings by using a cut down version of these files which are only for use with a compatible programme for cross compatibility, the box seems to copy these settings to another location. It doesn't actually use them directly.
Editing transponders does not work using FTP or E2 editing softwares, however E-Channelizer will connect to the box and upload/download, I recon that might stand a good chance of importing channels. I have a E2 box here and will quickly try and dump 27.5W from the Mutant and load it on to the Edision... Will report back shortly.
Sounds like you might be in with a chance there then! Hopefully it works!
 
RustySpoons

RustySpoons

Sleepy Hollow
Messages
2,238
My Satellite Setup
50E - 30W
CM 1.2m Polar Mount/Jack
65E- 65W
Gibertini 1m OP100 - STAB HH100 - Inverto Black Ultra 0.2 Twin
Mutant HD51
Edision Primo IP S2
Dreambox DM800HD
Venton Unibox HD2
Sony Bravia 50W829 DVB-S2 Tuner
My Location
South Wales
I've got the channels uploaded to the Edision, I need to find the rest of the config for these channels now to see if I can get them working...
1525173674576.png
 
Adam792

Adam792

Specialist Contributor
Messages
564
My Satellite Setup
Dishes: 80cm (5°W/4.8°E), 80cm (30°W), 60cm Zone 2 (13°E/19.2°E/28.2°E)
Receivers: HTPC (Intel i3 processor, nVidia Graphics, and TBS6905 4x DVB-S2 PCIe tuner card) running Ubuntu with Kodi/TVHeadend, Wetek Play2, Skybox M3.
My Location
Worcester
Kingofsat is my go-to for the PIDs!
 
RustySpoons

RustySpoons

Sleepy Hollow
Messages
2,238
My Satellite Setup
50E - 30W
CM 1.2m Polar Mount/Jack
65E- 65W
Gibertini 1m OP100 - STAB HH100 - Inverto Black Ultra 0.2 Twin
Mutant HD51
Edision Primo IP S2
Dreambox DM800HD
Venton Unibox HD2
Sony Bravia 50W829 DVB-S2 Tuner
My Location
South Wales
RustySpoons

RustySpoons

Sleepy Hollow
Messages
2,238
My Satellite Setup
50E - 30W
CM 1.2m Polar Mount/Jack
65E- 65W
Gibertini 1m OP100 - STAB HH100 - Inverto Black Ultra 0.2 Twin
Mutant HD51
Edision Primo IP S2
Dreambox DM800HD
Venton Unibox HD2
Sony Bravia 50W829 DVB-S2 Tuner
My Location
South Wales
Just a quick update, I've found what you can and can't change in Dreambox Edit.
Still working on it and will post back shortly.
 
RustySpoons

RustySpoons

Sleepy Hollow
Messages
2,238
My Satellite Setup
50E - 30W
CM 1.2m Polar Mount/Jack
65E- 65W
Gibertini 1m OP100 - STAB HH100 - Inverto Black Ultra 0.2 Twin
Mutant HD51
Edision Primo IP S2
Dreambox DM800HD
Venton Unibox HD2
Sony Bravia 50W829 DVB-S2 Tuner
My Location
South Wales
I'm sure this is all correct, unless PIDS etc have changed?
I just can't get it to display a picture or sound...
1525181387713.png

1525181357041.png
 
Captain Jack

Captain Jack

Модератор
Staff member
Messages
10,629
My Satellite Setup
See signature
My Location
North Somerset
I assume you have the correct BISS keys in place?
 
RustySpoons

RustySpoons

Sleepy Hollow
Messages
2,238
My Satellite Setup
50E - 30W
CM 1.2m Polar Mount/Jack
65E- 65W
Gibertini 1m OP100 - STAB HH100 - Inverto Black Ultra 0.2 Twin
Mutant HD51
Edision Primo IP S2
Dreambox DM800HD
Venton Unibox HD2
Sony Bravia 50W829 DVB-S2 Tuner
My Location
South Wales
M

moonbase

Mini Dish Man
Messages
2,049
My Satellite Setup
1.25m Unicorn
My Location
UK
I assume you have the correct BISS keys in place?

Is discussion of BISS keys now allowed on the forum, I thought they were a taboo subject ?
 
Lazarus

Lazarus

Tout Rond Bon Oeuf
Staff member
Messages
25,351
My Satellite Setup
80cm Motorised.
Several small Dishes.
Much else.
My Location
North York Moors
Staff Note

re. Keys ..... the rope is short <_<

Solicitation and Provision are not permitted, but we've generally exercised discretion over generalities. As long as it doesn't go too far, of course.
 
satesco

satesco

Specialist Contributor
Messages
851
My Satellite Setup
seven antennas,one toroidal with 16 lnbs,
6 satellite receivers,2 Meters,9 PC cards(tbs6983,6903,6590,6522,6209,2603,6909X,6903X,skystar hd2),2 tuners usb-tbs5927,Skystar HD.
Satellite reception between 100.5E-50.0W
My Location
Romania
Hi all been a long time since I've been on the forum a lot of new names on here now!!
Need some advice on the best receiver for 11495 v 44100-9/10 lntelsat 907 27 w
Ease of use is important (l haven't got much better! !! ) aac codec
Any info and experience would be much appreciated
I think this topic and this one might also help to choose what you need for 11495 V.
 
scopus

scopus

Specialist Contributor
Messages
2,067
My Satellite Setup
Primesat/Famaval 1.8 PF C/ku/Ka, Octagon SX8HD1, SX88, Openbox S3 Mini HD-V8S Freesat V7 HD-V8 Finder, Amiko A4K Combo, Satlook Colour HD Spectrum, Sansui A909 Amp and BOSE Acoustimass speakers for the audio.
My Location
Staffs UK
Staff Note

re. Keys ..... the rope is short <_<

Solicitation and Provision are not permitted, but we've generally exercised discretion over generalities. As long as it doesn't go too far, of course.
Surely it’s still along the ‘hacking’ route though?
 
RustySpoons

RustySpoons

Sleepy Hollow
Messages
2,238
My Satellite Setup
50E - 30W
CM 1.2m Polar Mount/Jack
65E- 65W
Gibertini 1m OP100 - STAB HH100 - Inverto Black Ultra 0.2 Twin
Mutant HD51
Edision Primo IP S2
Dreambox DM800HD
Venton Unibox HD2
Sony Bravia 50W829 DVB-S2 Tuner
My Location
South Wales
Lazarus

Lazarus

Tout Rond Bon Oeuf
Staff member
Messages
25,351
My Satellite Setup
80cm Motorised.
Several small Dishes.
Much else.
My Location
North York Moors
This discussion is veering off the Topic.

Rest assured Staff monitor such discussions and will make a judgement as to whether things go too far.

Any concerns should be raised by using the Report facility or by contacting a Staff Member, and not by Posting on Forum.

In a couple of hours, I shall tidy up recent Posts in order to restore continuity.
 
RustySpoons

RustySpoons

Sleepy Hollow
Messages
2,238
My Satellite Setup
50E - 30W
CM 1.2m Polar Mount/Jack
65E- 65W
Gibertini 1m OP100 - STAB HH100 - Inverto Black Ultra 0.2 Twin
Mutant HD51
Edision Primo IP S2
Dreambox DM800HD
Venton Unibox HD2
Sony Bravia 50W829 DVB-S2 Tuner
My Location
South Wales
Some of this might be better suited in the Edision thread, so may start a new one there with my progress.
TL;DR - Doesn't currently work with the Edision Primo IP S2/Octagon SX88
 
handyandy

handyandy

New Member
Messages
7
My Satellite Setup
Amiko Impulse, Edision Pico, Edision Primo IP
BBC 27.5W, Astra1 19.2
My Location
Portugal
Hi. I have had success with Dreambox edit and Primo but still no picture. The transponder scan, even showing good level and quality, does not find channels.PID.JPGPID2.JPG
 
M

Mickha

Super Moderator
Staff member
Messages
5,329
Those channels are BISS encrypted, and require some extra work, to scan in and view, especially on Enigma 2 receivers.
 
RustySpoons

RustySpoons

Sleepy Hollow
Messages
2,238
My Satellite Setup
50E - 30W
CM 1.2m Polar Mount/Jack
65E- 65W
Gibertini 1m OP100 - STAB HH100 - Inverto Black Ultra 0.2 Twin
Mutant HD51
Edision Primo IP S2
Dreambox DM800HD
Venton Unibox HD2
Sony Bravia 50W829 DVB-S2 Tuner
My Location
South Wales
Those channels are BISS encrypted, and require some extra work, to scan in and view, especially on Enigma 2 receivers.
It still won't work on these boxes.
 
M

Mickha

Super Moderator
Staff member
Messages
5,329
I know they can be made to work on VU+, and some other Enigma 2, receivers, but I think you have to edit, or replace, the lamedb file, and do a few other things.
I have no idea regarding an Edision receiver, but I see, by the posts, that RustySpoons seems to have tried everything.
I seem to recall the old Technomate receivers can handle them quite easily, without to much work, but I can't recall the specific models.
 
Channel Hopper

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Messages
26,961
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK South
I know they can be made to work on VU+, and some other Enigma 2, receivers, but I think you have to edit, or replace, the lamedb file, and do a few other things.
I have no idea regarding an Edision receiver, but I see, by the posts, that RustySpoons seems to have tried everything.
I seem to recall the old Technomate receivers can handle them quite easily, without to much work, but I can't recall the specific models.
They used to be something to do with Halloween, but the last time I saw one was three years or so back.
 
Top