Will the French TNTSAT card work with my Reciever.

F

fishtalk

Member
Messages
21
My Satellite Setup
Xtreme XSC-520H With 2 parbols I Astra 2 Hotbird
My Location
Barcelona Spain
I have an Xtream.... It would be much more practical if I only had to buy the card over the net. Sorry but my technical know how is 0, so I'll put the Specs here//
Just like to know if it will work or if I will have to buy the TNT decoder+ card next time I'm in France
Thanks

Xtreme Hornet
@Sky video, @Skycrypt-Modul eingebaut
Digitaler Sat-Receiver mit 2 CI, Skycrypt, Free-X TV-Modul und USB Steuerung
CANALI: 9000 (TV+Radio); via PC unbegrenzt
Satelliten: 60
Symbolraten: 2-45 MslSek.
SCPC tauglich: ja
Ku/C/S Band: ja
Scart Anschlüsse: 2
Video Ausgang: RCA
Analoger Stereo Ausgang: RCA
Digitaler Audio Ausgang: optisch
DISEqC: 1,0, 1,2
USB: ja, VideoLink Software im Lieferumfang
0/12VSchaltung: ja
EPG: nur Now & Next
OTA: ja
Timer: ja (8)
CI Slots: 2
CAS embedded: Skycrypt
Free-X TV Decoder: ja
Teletext: eingebaut oder über VBI Insert
Farbsysteme: PAL, SECAM, NTSC
Netzteil: 90-250V 5016OHz
Stromverbrauch: Standby ca. 11W, Betrieb: 15W
unterstützte Sprachen: Englisch, Deutsch, Französisch, Spanisch, Finnisch, Italienisch, Holländisch, Türkisch, Russisch, Dänisch, Schwedisch, Norwegisch, Ungarisch, Arabisch, Tschechisch, Bulgarisch




Specification

Tuner
FEC Modes Rate: 1/2, 2/3, 3/4, 5/6, 7/8
Input Connector: F type female (75 Ohm)
Frequency Range: 950MHz ~ 215OMHz
Symbol Rate: 2 ~ 45 Mbaud
Demodulation: QPSK

RF Modulator
PLL type: CH 21-69 for the modulation
TV Standard: PAL B/G, I, D/K NTSC M selectable
RF Connector: 75 Ohms, 169-2, Male/Female
Frequency Range: UHF: 470 ~ 860MHz

MPEG TS A/V Decoder
Video Resolution: 720 x 576
Input Bit Rate: Max. 90 Mbit/s
Transport Stream: MPEC-2 ISO/IEC 13818-1
Audio Decoding: MPEG/Musical Layer 1 & 11
Audio Mode: Single/ Dual Channel

A/V & Data Input/Output
Video


RCA/Cinch, Video Output(CVBS)/SCART(CVBS, RG:cool:

RCA/Cinch Volume & Mute Control


Audio

(Resolution: 20 bits DAC, Max 2Vrms)

S/PDIF of Dolby Digital Bitstream Out

RS-232C:Transfer rate 11 5Kbps, 9 PIN D-Sub Type

System Resources
Flash Mernory: 1 Mbyle (Optional Expand)
SDRAM: 8Mbyte
Main CPU MPEG Chip: STi 5518

Power Supply
Input Voltage: AC 90 to 25OV, 50/60Hz
Power Consumption: Max. 25W
Protection: Separate Internal Fuse
Type: SMPS

Physical Specification
Size(W x H x D): 340 x 60 x 250(mm)
Net Weight: 2.5kg
Operating Temperature: 0°C ~ 50°C
 
Robbo

Robbo

Retired Mod
Messages
6,424
My Satellite Setup
TM6800HD, TM1000, TM600 Linux,TM2200 motor, Channel Master 1.2m motorised, TD110 dish Meter=Satlook Micro+G2 NIT
My Location
Gravesend,Kent,UK
Hi, the cards are a are paired to the TNSAT box, so you would need one anyway. If you search the forum or google, you will find that yes, the card does work in some other boxes, but the pairing issue needs to be handled, so you do need the original box to obtain the details needed.
 
F

fishtalk

Member
Messages
21
My Satellite Setup
Xtreme XSC-520H With 2 parbols I Astra 2 Hotbird
My Location
Barcelona Spain
Robbo said:
Hi, the cards are a are paired to the TNSAT box, so you would need one anyway. If you search the forum or google, you will find that yes, the card does work in some other boxes, but the pairing issue needs to be handled, so you do need the original box to obtain the details needed.
Ok thanks... But i've seen just the card's on sale on eBay.fr
 
F

fishtalk

Member
Messages
21
My Satellite Setup
Xtreme XSC-520H With 2 parbols I Astra 2 Hotbird
My Location
Barcelona Spain
Ok lets put it another way as no body is answering my question.
The "specs" of my decoder are as above...
These are the "specs" of a decoder specially concieved for TNTSAT.


Démodulateur DVB-S- QPSK Roll off : 0,35 Symbol rate : 10-30 MS/s FEC : 1/2 2/3 3/4 5/6 7/8 Microprocesseur Processeur : STi 5105 266MHz, 450 MIPS Décodeur Vidéo MPEG-2 Profil : MP@ HL à 50 Hz Débit : jusqu’à 15 Mbit/s Décodeur Audio MPEG-1 couches I et II (Musicam) MPEG-2 couche II Modes : Mono, Stéréo, dual channel Echantillonnage : 32 / 44,1 et 48 MHz AC3 multi-canal en mode transparent Face avant 7 touches Afficheur 4 digits 7 segments Récepteur IR Lecteur de carte à puce Face arrière 2 x IEC 169-24F femelle : Entrée et sortie satellite 2 x PERITEL (TV, AUX) 3 x RCA Audio (stéréo + S/PDIF) Alimentation Entrée : Alternatif 220-240 VAC ~50 Hz Consommation max. (avec alim LN:cool: : 25 W Consommation en veille max. : 25 W Spécifications mécaniques Terminal Couleur : noir Taille (L x P x H) : 260 x 195 x 40 mm Poids terminal seul : 1,2kg

Can some technical genius.... tell me if My Reciever is compatible.... Thanks
 
Top