Zenega CD1004iS Boot problem

samwy said:
Hi There,

I am using the dish tv setup box.
it initially start blinking a light orange and green light..and continues the whole time..
the tv screen remains blank.
its not working for almost a month now, but suddendly a day beofre it worked for one complete day and again went off.
I asked here at the local electrical shop if they could fix it, they are not able to do so, i cannot find a dish tv supplier here to fix it.
can i fix it myself???
Can anyone please help me out of this!!!

Thanks
Click to expand...

call [fieldset=Admin]removed[/fieldset]
 
hsarp72 said:
Hello all,

I am Dish TV user, using "Zenega CD1004iS". Past few days I am having trouble with booting this setup box. It starts with very dim and fast blinking orange light, slows down after sometime and and finally ends up with proper green light. This complete process takes about 5-10 minutes, which is quite frustrating. I consulted the experts and they advised me to re-install the software/firmware.
Can anyone help me with it? Is it possible doing it at home and how can we do it step by step.
Thank you for all those willing to help me.
-Hsarp
Click to expand...

please change electrolytic capaciters in power supply secondary section
 
SIR I HAVE ZENEGA CD-1004IS IT'S GREEN LIGHT BLOWS BUT NO DISPLAY ON SCREEN ONLY PLANE RASTER, I TRY LOTS OF TIME FOR SET TO SET DOWNLOADING BUT NOT SUPPORT, ONLY THIS BOX DOSE NOT SUPPORT ON WHICH FLASH IC HAVE V1.61 TAG WITH RED MARKS, OTHER BOX SUPPORT WHICH FLASH IC HAVE V1.56

PLEASE POST HERE REPLY, ON email removed
 
dear sir
my zenega 1004is setbox
problam dish alivation ok but 301 signal not found problam
i am change power suplaiy but problam not solad so plz
 
Hi,
I have the same problem : LED blinks green/orange when I turn ON the STB.
I changed the 2 capacitors from 10v to 25v as suggested earlier by Ved.
Still the problem persists.

Though I have found another way to make it work, it is not a convenient way.
The other way I m using is, I switch off the STB by double clicking the ON/OFF switch on STB, after the LED turns red, I turn the STB ON.
Then it becomes and remains green, on the TV screen I see a msg saying Unable to receive signal, but as I change the channel the things work!

Kindly suggest me probable solution.
Thanks.

..abhi..
 
For those who are new to capacitors like me.

I bought them from a local electrical shop ( main electrical market).
1 capacitor for Rs 4 ( Four only)
Got the soldering done for Rs 10 ( Ten only) for 1 capacitor.

So if this works, it is the cheapest solution.

..abhi..
 
hsarp72 said:
Hello all,

I am Dish TV user, using "Zenega CD1004iS". Past few days I am having trouble with booting this setup box. It starts with very dim and fast blinking orange light, slows down after sometime and and finally ends up with proper green light. This complete process takes about 5-10 minutes, which is quite frustrating. I consulted the experts and they advised me to re-install the software/firmware.
Can anyone help me with it? Is it possible doing it at home and how can we do it step by step.
Thank you for all those willing to help me.
-Hsarp
Click to expand...

from jeevankumar
 
jeevankumar said:
from jeevankumar
Click to expand...

Apekshaelectronics said:
SIR I HAVE ZENEGA CD-1004IS IT'S GREEN LIGHT BLOWS BUT NO DISPLAY ON SCREEN ONLY PLANE RASTER, I TRY LOTS OF TIME FOR SET TO SET DOWNLOADING BUT NOT SUPPORT, ONLY THIS BOX DOSE NOT SUPPORT ON WHICH FLASH IC HAVE V1.61 TAG WITH RED MARKS, OTHER BOX SUPPORT WHICH FLASH IC HAVE V1.56

PLEASE POST HERE REPLY, ON email removed
Click to expand...

from jeevankumar
 
jeevankumar said:
from jeevankumar
Click to expand...

dear sir

please change all 4 electrolytic capciters in power supply unit. 1000/25v , 470/50v.



Thanks


with regards
deepak soni
 
dear sir
i change the whole supply with another box.But same problem is seen.I have another box when i on the box , display light first below green after this the light
below red . Set top box video display restart.
 
dear sir
i have a dish tv kaon reciever ksc-100mco. i want to save the box data in my pc with rs232.please send me kaon ksc-100mco loader.please reply quickly.
 
I stumbled upon this useful thread, So Thank You all knowledgeable ones.
I am from INDIA MP, i am having a strange problem with my STB zenega 1004s with DISHTV connection.
Sometimes it gets signal perfectly and some times it just shows 301 signal not found, and nothing helps (power cycling etc.)
Though i have checked the alignment with another STB its working fine
also there is no problem of power.
Even dish care centre have tried it two days in a row it worked fine but after few hours or when you turn it off and turn it on again signal is gone, anybody phased with this sort of problem. or i will have to again give it to DISH care for one day and doesn't seem they have figured it out yet!
 
ved said:
hi hsarp

no needs to change power supply.only change power supply filter cap.25v 1000mf.[:P]
Click to expand...
Thanks for ans,
I joined yesreday for the same problem,read here in the Morning & did the same & now my STB quick- loads in 15 sec (earlier 30min)
Thanks again.
 
I have 8 feet c band dish & Other is Dish tv Ku Band dish ,Can i used my cd 1004is zenega settop box of dishtv to operate for dth as well as C Band Pas 10 channels through used DiseqC switch can anybody give me required set top box softwere or any other solution.
 
in new zanega 1004is stb .there is no data cable jack. how to download software in this boxes.plz reply quickly.
 
Back
Top