Zinwell wb68 switch

E

eshan

Member
My Satellite Setup
Sat118,119,91,110
My Location
calgary
hi
every one i am new here and also with dm500s. have a question if some one can help me with it.
my dreambox was working fine with 4in1 DiSEqc switch for Sat118/119,110,91w so i bought Sonicview which i am also using so i installing Zinwell wb68 22khz 6x8 multiSwitch with 4in1Diseqc Switch connecting to Receiver. my sonicview is working fine with zinwell switch get signal on all 4 sats but my Dreambox dm500s isn't working its show 0 snr and 0 agc on all sats. so can any one help me how to setup lnbs setting in my dm500s. thanks in Advance!
 

Attachments

  • 4 sats-6 to 8rec.webp
    4 sats-6 to 8rec.webp
    28.7 KB · Views: 281
If you are trying to feed three receivers, then you need three feeds from each LNB to negate any possible conflicts. The way you have it at the moment is overkill for the inputs you have, you may as well have all three LNB x two ouputs connected to one switch.
 
rolfw said:
If you are trying to feed three receivers, then you need three feeds from each LNB to negate any possible conflicts. The way you have it at the moment is overkill for the inputs you have, you may as well have all three LNB x two ouputs connected to one switch.
Click to expand...

do you mean by feed (cable from lnb) if yes then you can only run two cable from each lnb which is connected to 18v, 13v in Zinwell switch. as you can see in pics two cable from each lnb's going to switch then after switch i have connected 4in1 DiSqC switch ? so do what will be setting in dm500s
 
Ah OK, unfortunately this type of kit is not used and of little use in Europe, as we use quattro LNBs, with a multiswitch, giving Vertical high and low, plus Horizontal high and low, for this setup we'd probably use three quad LNBs and three four way DiseqC switches.

Have a look here _http://www.abadss.com/forum/29-fta-accessory-talk/65806-zinwell-wb68-6x8-multiswitch.html
 
rolfw said:
Ah OK, unfortunately this type of kit is not used and of little use in Europe, as we use quattro LNBs, with a multiswitch, giving Vertical high and low, plus Horizontal high and low, for this setup we'd probably use three quad LNBs and three four way DiseqC switches.

Have a look here _http://www.abadss.com/forum/29-fta-accessory-talk/65806-zinwell-wb68-6x8-multiswitch.html
Click to expand...
thank you i will check it and i didnt know i was at uk website
 
Back
Top