Grifta
New Member
- Joined
- May 12, 2018
- Messages
- 2
- Reaction score
- 0
- Points
- 1
- Age
- 61
- My Satellite Setup
- Pace msp200 & Philips offset dish 90 cm decoder turning up on Tuesday
- My Location
- Andover Hants
So i thought i would have a go with a motor dish setup
I have a 0.9m philips Fibo stop dish on a DM200 Icecrypt mount attached to an Icecrypt S3750CHD receiver.
Took all day to realise I had to drill down into one of the many satellite listings via edit and press the yellow button to select USALS.
Once i did this I inputted my latitude and longitude and then pressed the green key to set all sat position listings to USALS.
The problem is all sats east of zero degrees drop in ok but those west of zero dont.
Hispasat for instance at 30W drives the dish all the way back to the East.
So ATM I've only got eastern satellites.
Please Help
I have a 0.9m philips Fibo stop dish on a DM200 Icecrypt mount attached to an Icecrypt S3750CHD receiver.
Took all day to realise I had to drill down into one of the many satellite listings via edit and press the yellow button to select USALS.
Once i did this I inputted my latitude and longitude and then pressed the green key to set all sat position listings to USALS.
The problem is all sats east of zero degrees drop in ok but those west of zero dont.
Hispasat for instance at 30W drives the dish all the way back to the East.
So ATM I've only got eastern satellites.
Please Help