TM 5402 M3 Blind Scan

Costactc

Regular Member
Joined
May 30, 2012
Messages
811
Reaction score
763
Points
93
Age
58
My Satellite Setup
3m channel master mesh-24" vonweise actuator-ps1 x2 lnbf(L)-pansat ap3500 positioner-x2 premium III-vu+solo2.
2.4m fortec solid-24" vonweise actuator-esx 241 lnbf(c)-vbox 7 positioner- dm800.
1.2m fortec-24"sj actuator-invacom snh-031--tm 5402 m3.
My Location
Canada
I made an attempt to blind scan several sats today without any luck. My 5402 m3 will not blind scan. I have had this receiver for quite some time now and this was never an issue for me in the past. Reboot and fw upgrade to the latest did not rectify the issue. Any ideas folks?
 

william-1

Super Moderator
Staff member
Joined
Jul 2, 2005
Messages
12,181
Reaction score
12,266
Points
113
Location
Epping Forest
My Satellite Setup
OP Gibertini 100 XP+ Inverto Black Ultra Lnb
Superior Dark Motor (160° max)
(50 east to 45 west)
Octagon SX88+Optima (A/B switch) Edision primo IP S2

Raven 88cm Mesh Dish + IBU Twin output
Stab100 H to H (120° max)
(53 east to 45 west)
Octagon SX88+ Ultra HD (A/B switch) Golden Interstar Alpha_X
My Location
Epping Forest Essex
What is your dish set up ? fixed /motorised ?
What software is in the receiver ?
 

Costactc

Regular Member
Joined
May 30, 2012
Messages
811
Reaction score
763
Points
93
Age
58
My Satellite Setup
3m channel master mesh-24" vonweise actuator-ps1 x2 lnbf(L)-pansat ap3500 positioner-x2 premium III-vu+solo2.
2.4m fortec solid-24" vonweise actuator-esx 241 lnbf(c)-vbox 7 positioner- dm800.
1.2m fortec-24"sj actuator-invacom snh-031--tm 5402 m3.
My Location
Canada
Thanks for the reply. Motorised on my 3m CM mesh with fw 1.39p from Oct. 12. All sats from 31.5-135w all scanned in.
 

william-1

Super Moderator
Staff member
Joined
Jul 2, 2005
Messages
12,181
Reaction score
12,266
Points
113
Location
Epping Forest
My Satellite Setup
OP Gibertini 100 XP+ Inverto Black Ultra Lnb
Superior Dark Motor (160° max)
(50 east to 45 west)
Octagon SX88+Optima (A/B switch) Edision primo IP S2

Raven 88cm Mesh Dish + IBU Twin output
Stab100 H to H (120° max)
(53 east to 45 west)
Octagon SX88+ Ultra HD (A/B switch) Golden Interstar Alpha_X
My Location
Epping Forest Essex
The software is capable of Blind Scans so your problem may be with your dish alignment & connections,
Do you have another receiver that you can try to eliminate your possible dish reception problems.
 

John

Enthusiast.
Joined
Jan 1, 2000
Messages
3,726
Reaction score
5,528
Points
113
Location
North Nottinghamshire.
My Satellite Setup
Elite 2.2 PF - CM1.8 - CM1.2 - Gibertini 1.25.
Ku - Ka -C & Ext C.
PC cards-TM5402 receivers.
Promax FSM.
My Location
North Nottinghamshire.
Probably not the same problem as you have but my 5402 M3 had a little tantrum the other day that sent it unstable after a mains outage , a "factory reset" sorted it . Might be worth a try
 

Costactc

Regular Member
Joined
May 30, 2012
Messages
811
Reaction score
763
Points
93
Age
58
My Satellite Setup
3m channel master mesh-24" vonweise actuator-ps1 x2 lnbf(L)-pansat ap3500 positioner-x2 premium III-vu+solo2.
2.4m fortec solid-24" vonweise actuator-esx 241 lnbf(c)-vbox 7 positioner- dm800.
1.2m fortec-24"sj actuator-invacom snh-031--tm 5402 m3.
My Location
Canada
Probably not the same problem as you have but my 5402 M3 had a little tantrum the other day that sent it unstable after a mains outage , a "factory reset" sorted it . Might be worth a try

No issues on reception as most tp scan in at or over 15 db and my vu+ solo2 blind scans without any problem on the same feed. I normally do a factory reset after a fw upgrade but I neglected to do that today, all well in the blind scan now. Thanks gents.
 

Pipedream

Regular Member
Joined
Jul 15, 2015
Messages
455
Reaction score
585
Points
93
Age
61
My Satellite Setup
0.9-1.2 & 2.2 precision dishes TM5402 mk3 TM5302 & V8 Golden
My Location
Sheffield
If you done a factory reset did you load a new channel list or just using the pre installed
 

Costactc

Regular Member
Joined
May 30, 2012
Messages
811
Reaction score
763
Points
93
Age
58
My Satellite Setup
3m channel master mesh-24" vonweise actuator-ps1 x2 lnbf(L)-pansat ap3500 positioner-x2 premium III-vu+solo2.
2.4m fortec solid-24" vonweise actuator-esx 241 lnbf(c)-vbox 7 positioner- dm800.
1.2m fortec-24"sj actuator-invacom snh-031--tm 5402 m3.
My Location
Canada
I previously had saved all info on my usb.
 

Pipedream

Regular Member
Joined
Jul 15, 2015
Messages
455
Reaction score
585
Points
93
Age
61
My Satellite Setup
0.9-1.2 & 2.2 precision dishes TM5402 mk3 TM5302 & V8 Golden
My Location
Sheffield
You could try loading the original TM software to see if that works.
 

Costactc

Regular Member
Joined
May 30, 2012
Messages
811
Reaction score
763
Points
93
Age
58
My Satellite Setup
3m channel master mesh-24" vonweise actuator-ps1 x2 lnbf(L)-pansat ap3500 positioner-x2 premium III-vu+solo2.
2.4m fortec solid-24" vonweise actuator-esx 241 lnbf(c)-vbox 7 positioner- dm800.
1.2m fortec-24"sj actuator-invacom snh-031--tm 5402 m3.
My Location
Canada
My blind scan issue has been resolved, factory default did the trick. Unfortunately my keys need to be re-inserted which can be quite tedious.
 

scopus

Specialist Contributor
Joined
Mar 25, 2005
Messages
3,174
Reaction score
3,807
Points
113
Age
59
My Satellite Setup
Primesat/Famaval 1.8 PF C/ku/Ka, Octagon SX8HD1, SX88, Openbox S3 Mini HD-V8S Freesat V7 HD-V8 Finder, Amiko A4K Combo, Satlook Colour HD Spectrum, Sansui A909 Amp and BOSE Acoustimass speakers for the audio.
My Location
Staffs UK
My blind scan issue has been resolved, factory default did the trick. Unfortunately my keys need to be re-inserted which can be quite tedious.
You can upload keys to the USB as well as channels, but it does not save the P****Vu keys.
 
Top