Recent content by hamham

Would you please advice how this problem could be solved,I used to see a red led from the top of the receiver's cover the led used to blink but now it does not turn on, and I used to swtich off and on the receiver from the main power supply to get it working but now it does not want to turn on...

I made it working with Win98, but I tried to upgrade CAM but on the TV screem It is stuck on Block:0001

after upgrading the bootloader ans firmware it start getting below msg Highspeed loader 2.1 loading noanswer BS2.10UNS and keep reapeting it.

thanks for your reply, i tried with the receiver on, but once i select upload subrouten, the box goes off then on by it self

Any one could help me with the procedures to flash irdeto cam 900440 using vgrabber + nokia 9600 dvb2000+ SCSi with the receiver is on standby mode, I run vgrabber select upload subrotune, select the .sbr file, then the vgrabber stuck doing nothing, it just says remaining 2XXXXX

How do you read irdeto 2 card? what softwares do you use? what hardware do you use? Do you think that it is that easy??!!

Yaa, you are right

I think that this is obvious since DB6000 will be released with a HD and they said that it will be similar to the 5620 so technically a HD can be added to 5620

Please find the instruction guide attached in a "pdf" format

sure i will do an explaination and put it here

thanks mate I made it working

yaa I can get the Dreambox working on the Internet wired to my router

by the way my access point is connected directly to my DB not through a HUB, is the HUB important to be between them?

My linksys WAG54G is connected to my PC I am trying to connect my dreambox to linksys WAP54G and make my DB and AP connected wireless to my WAG54G Is it possible to setup my whole system with these two things that I have or there are more devices need to be added!! If it is possible, I...

Thanks dear I was able to access the AP IP address 192.168.1.245 as you said the username field should be blank and the password is admin, but the only problem left now is the important one, which how to set up the AP and connect it with the dreambox