Recent content by kitoog

Think you are right Vitor looking for a second hand Micro+, just I like trying to fix stuff lol. I will keep an eye out for Micro's on ebay alright.

only the new superjack dg120+ model has usals, not the dg120 model. hopefully you got the new dg120+ model as usals makes setup way easier. for me when i am setting up with usals i input coordinates, then select easy satellite to find like hotbird. turn down the signal on the meter so that you...

did not install any smbfs extra software, can get fresh image to mount to my landrive fine. can only get smbfs to mount through webif with gemini images for some reason. was gonna get a linkstation pro landrive which has nfs support as well as smb. probably not worth using with a 500s as the...

i have the same type of nas-basic landisk and i can mount it with smbfs to 500s no problem with gemini 3.4 through webif. but on some channels when i try to record i get the following error (as below) "record failed due to an write error during recording. check file system for corruption" .i...

post below about sl65 user setting up a moteck sg2100a and motor working fine.i take it you got a cheapo sat meter in lidl ,if not get one off same site for the install. you will need a better wall mount though as the lidl one if you are using it ,is too weak...

you can get the moteck sg2100a off this german seller below for about 60 euro incl. delivery. very good motor with usals which makes installing a motor a lot easier. bought from this seller many times and come highly recommended. delivery is by UPS and takes 4 days for delivery to ireland...

same problem with trying to power the motor just by the meter alone. but i can drive the superjack motor by connecting reciever part of meter to motor lnb inputput and lnb 2 output of meter to motor reciever input connection . can use other lnb 1 on meter to test signal,seems to work but surely...

i want to make use of the meter's ability to drive the diseqc motor .did anybody use one of these to drive a diseqc motor successfully?

got myself a digisat pro accu to help install mates motorised system. but when i connect the meter to my moteck sg2100a motor for testing (which is already installed) all i get is over current on screen.i have the meter between the reciever and motor input.meter works fine with direct connection...

cheers, nice program, just what i needed.

gonna put a setup a motorised system with 88cm dish up for a mate. he has some tall trees at the end of his garden. so i need to know roughly at what degree to the horizon the signals from satellite come in at.if you know which satellite has the lowest angle would be even better. i can then...

cheers rolfw and wod for the replies. have hours of fun ahead of me now setting the dish up:)

thats good to hear, cheers. by the way what do you think of the dish. i was going to use my old lidl 80cm dish which served me fine for a few years ,but hoping gain might me a bit better with slightly bigger dish.

buying parts for a friend to set up a motorised system. going to use a moteck sg2100a and wondering is there much weight difference between the steel and aluminium triax tds 88cm dishes and would the steel dish be ok with the motor,. the aluminium version is about 55 euro while steel one is 30...

Nearly all german sites just accept bank transfer, there not too fond of credit cards/paypal ( and some of the ones that accept those, add a credit card charge). If the site looks dodgy then stay away, but theres is an awful lot of good german satellite shops. Hm-sat.de is very good and also...