Recent content by spike47

Hi Thanks for your reply, yes I think that has always been the case , I don't think you can buy them of the likes of ebay, but mine was given to by my daughter , they have moved and dont want a dish sticking on the side of the house, so they get all there tv etc through EE . Anyway the only...

Would anyone know if you have to have a different dish set up for using a Sky Q box as to a Sky HD+. My Sky HD+ box works fine, but got a Sky Q box from daughter and it does not receive a signal, it is only on a single LNB, have a double LNB on dish but use one each for upstairs and lounge...

Yes that is correct , only one that will take the uploaded voltage .

Hi Just a update , I got a replacement unit and now up and running , just a couple of points on this crap Labgear shit , it says the voltage can be fitted to either outputs of the Amp , but that is not correct it will only work on the second output from the Aerial input . And the other point...

Hi All Went on roof AGAIN , and took out the Amp to check it in doors , the weather is atrocious , looked at Connections and the middle one there is no spring clamp inside , well there is but it is wide open it will not have been clamping onto the central copper wire of the cable , I checked...

Hi Channel Hopper I have just checked the voltage to my Daughters room and there is nothing showing ! , I am going to go back on the roof and check the voltage straight out of the amplifier that feeds my Daughters TV , will come back with the results . thanks to ALL spike

You must be correct again , I keep getting a signal on the other output to my daughters room but it keeps going off , lounge TV ok , so it looks like it will have to come off and back to screwfix , 30 day warranty up yesterday , but will give it a try . spike

Hi Nano Done what you suggested put power into other connector and it worked fine , I would not of thought to do that , mind you trust me to pick the wrong one . cheers and thank you very much for your Help . spike :-thumb1

Hi All I have just fitted a Labgear 2 Way Masthead Amplifier PUL121 ( Picture Attached ) , to take a feed to a: Lounge TV , b: TV for Daughters Bedroom . I have a 12 Volt feed from the Lounge TV up to the Masthead Amp , but I am not getting any signal to TV , I have checked the Continuity of...

Hi Paul Yes that is the best and neatest way , off now to get the bits . thanks again for your help , what would we do without FORUMS . cheers spike

Hi rolfw Thanks for that info , now I understand , I think I will just put another box in the room with another cable into it . off back to bed now . cheers spike

Hi Thanks for your reply , when you say , " you need a diplexer to combine the signals into one cable. " not sure where that one cable would go , into the back of the Triplex as in my first Post !! , what I need is a Sat feed to my Digi box and a UHF feed to my TV ( built in freeview ) . spike

Hi I am wanting to buy a back plate to put a cable from my Aerial and a Cable from my dish into my bedroom ,the question is , the back plate I have seen as below , only has one inlet ! . " TV + FM/DAB + Satellite triplexed surface outlet plate ", so how do I connect my Aerial and Sat cables to...