Wobbler
Regular Member
- Joined
- Nov 3, 2004
- Messages
- 52
- Reaction score
- 0
- Points
- 0
- Age
- 79
- My Location
- Essex, UK
There has been some dialogue under this thread -
http://www.satellites.co.uk/php-bin/forum/showthread.php?t=31068
but it may have been missed by other users due to the title.
My basic problem is that loaded under 1.07 (or any image based on it) the motor control works fine, but as soon as any 1.08 image is loaded the motor control stops working, go back to 1.07 and it works again.
I don't know whether use of this positioner box - Edon 2150 VBox - is common or not, would be nice to know if any other users have hit similar problems.
Thanks
__________________________________________________
Dreambox 7000S - no external storage
80cm dish 30W to 42E - motor and LNB unknown
Edon 2150 VBox positioner.
http://www.satellites.co.uk/php-bin/forum/showthread.php?t=31068
but it may have been missed by other users due to the title.
My basic problem is that loaded under 1.07 (or any image based on it) the motor control works fine, but as soon as any 1.08 image is loaded the motor control stops working, go back to 1.07 and it works again.
I don't know whether use of this positioner box - Edon 2150 VBox - is common or not, would be nice to know if any other users have hit similar problems.
Thanks
__________________________________________________
Dreambox 7000S - no external storage
80cm dish 30W to 42E - motor and LNB unknown
Edon 2150 VBox positioner.