bracket for disecq motor

saj1985

saj1985

Member
Messages
763
My Satellite Setup
Dreambox 800HD SE, Dreambox 500S, Skybox F5S, 90cm Solid Dish, Tm2600 Motor, Inverto Black Ultra LNB! :)
My Location
Lost...
hey peeps, i wanted to use the tm2600 (technomate) motor ive got with the fibo 90,
i was wondering where can i get a bracket to connect the dish to the motor?
 
saj1985

saj1985

Member
Messages
763
My Satellite Setup
Dreambox 800HD SE, Dreambox 500S, Skybox F5S, 90cm Solid Dish, Tm2600 Motor, Inverto Black Ultra LNB! :)
My Location
Lost...
any ideas as to where can i buy it from?
 
RimaNTSS

RimaNTSS

Super Moderator
Staff member
Messages
5,003
My Satellite Setup
Some SAT-related hardware.
My Location
N-E from Riga
Could you show some pictures to understand what exactly should be connected?
 
saj1985

saj1985

Member
Messages
763
My Satellite Setup
Dreambox 800HD SE, Dreambox 500S, Skybox F5S, 90cm Solid Dish, Tm2600 Motor, Inverto Black Ultra LNB! :)
My Location
Lost...
Could you show some pictures to understand what exactly should be connected?
this is the back of the dish where the original motor goes on,
its length is approx 13cm and the width is 7.8cm

i need a bracket to connect to holes on the back of the dish and so i can connect it to the tm2600 disecq motor

hope what im saying makes sense
 

Attachments

RimaNTSS

RimaNTSS

Super Moderator
Staff member
Messages
5,003
My Satellite Setup
Some SAT-related hardware.
My Location
N-E from Riga
I see. I thought you are going to use original polarmount and Fibo motor. So, you probably need to make customized bracket. I will think about it tomorrow.
 
saj1985

saj1985

Member
Messages
763
My Satellite Setup
Dreambox 800HD SE, Dreambox 500S, Skybox F5S, 90cm Solid Dish, Tm2600 Motor, Inverto Black Ultra LNB! :)
My Location
Lost...
I see. I thought you are going to use original polarmount and Fibo motor. So, you probably need to make customized bracket. I will think about it tomorrow.
i am planning to use the original motor but not sure if it works yet,
my father in law is checking it out for me as he's a retired electrician

also the wiring on the fibo motor seems different compared to just one coaxial wire for the technomate motor

how do i go about making one? im so crap when it comes to diy lol
 
RimaNTSS

RimaNTSS

Super Moderator
Staff member
Messages
5,003
My Satellite Setup
Some SAT-related hardware.
My Location
N-E from Riga
how do i go about making one? im so crap when it comes to diy lol
It is never late to start DIY.
To control Fibo motor you need positioner and additional 4 (in some cases 5) wires from room to antenna.
 
saj1985

saj1985

Member
Messages
763
My Satellite Setup
Dreambox 800HD SE, Dreambox 500S, Skybox F5S, 90cm Solid Dish, Tm2600 Motor, Inverto Black Ultra LNB! :)
My Location
Lost...
It is never late to start DIY.
To control Fibo motor you need positioner and additional 4 (in some cases 5) wires from room to antenna.
how much do the positioners normally cost about?

i'll have to keep a look out for one
 
RimaNTSS

RimaNTSS

Super Moderator
Staff member
Messages
5,003
My Satellite Setup
Some SAT-related hardware.
My Location
N-E from Riga
saj1985

saj1985

Member
Messages
763
My Satellite Setup
Dreambox 800HD SE, Dreambox 500S, Skybox F5S, 90cm Solid Dish, Tm2600 Motor, Inverto Black Ultra LNB! :)
My Location
Lost...
RimaNTSS

RimaNTSS

Super Moderator
Staff member
Messages
5,003
My Satellite Setup
Some SAT-related hardware.
My Location
N-E from Riga
saj1985

saj1985

Member
Messages
763
My Satellite Setup
Dreambox 800HD SE, Dreambox 500S, Skybox F5S, 90cm Solid Dish, Tm2600 Motor, Inverto Black Ultra LNB! :)
My Location
Lost...
Not really. That is from my memory. I just sold 2 used positioners for 30 EUR.
you got any left?

once i find out if the motors working i'll try to get one
 
RimaNTSS

RimaNTSS

Super Moderator
Staff member
Messages
5,003
My Satellite Setup
Some SAT-related hardware.
My Location
N-E from Riga
I have several but also have plans how to use them. Can ask in the shop, maybe they have some new left.
 
Trust

Trust

Specialist Contributor
Messages
932
My Satellite Setup
1.8 m CM at SMR 1224 + Elev. with 7 lnb changer Ku (lin - circ) - Ka (lin - circ) C (lin - circ)
My Location
Nijmegen Netherlands
this is the back of the dish where the original motor goes on,
its length is approx 13cm and the width is 7.8cm

i need a bracket to connect to holes on the back of the dish and so i can connect it to the tm2600 disecq motor

hope what im saying makes sense
I made sevaral from Moteck and STAB mastclamps .
Also complete one from other material with the dish as close as possible to the rotor .fibo fix moteckmount.jpgfix stab clamp.jpgshort builded clamp full.jpgshort builded clamp parts.jpgshort builded clamp topview.jpgshort builded clamp.jpg
 
saj1985

saj1985

Member
Messages
763
My Satellite Setup
Dreambox 800HD SE, Dreambox 500S, Skybox F5S, 90cm Solid Dish, Tm2600 Motor, Inverto Black Ultra LNB! :)
My Location
Lost...
Trust

Trust

Specialist Contributor
Messages
932
My Satellite Setup
1.8 m CM at SMR 1224 + Elev. with 7 lnb changer Ku (lin - circ) - Ka (lin - circ) C (lin - circ)
My Location
Nijmegen Netherlands
These are long gone , but I can build one .
 
saj1985

saj1985

Member
Messages
763
My Satellite Setup
Dreambox 800HD SE, Dreambox 500S, Skybox F5S, 90cm Solid Dish, Tm2600 Motor, Inverto Black Ultra LNB! :)
My Location
Lost...
Trust

Trust

Specialist Contributor
Messages
932
My Satellite Setup
1.8 m CM at SMR 1224 + Elev. with 7 lnb changer Ku (lin - circ) - Ka (lin - circ) C (lin - circ)
My Location
Nijmegen Netherlands
saj1985

saj1985

Member
Messages
763
My Satellite Setup
Dreambox 800HD SE, Dreambox 500S, Skybox F5S, 90cm Solid Dish, Tm2600 Motor, Inverto Black Ultra LNB! :)
My Location
Lost...
all sorted @Trust1 is going to make me a bracket for the fibo and also do me a lnb too

@Trust1 thanks mate i really appreciate it
 
Top