alan1572
Member
- Joined
- Dec 10, 2007
- Messages
- 26
- Reaction score
- 0
- Points
- 0
- Age
- 52
- My Satellite Setup
- BASIC MOTOR SET UP
- My Location
- LANCASHIRE
not sure where to put this so sorry if it's in the wrong bit.
got a bit of a problem with a cascade system, all five floors (except the top floor)have 1 tap (varying losses) and 1 mains powered multiswitch, the 2nd floor is having problems with reception on sky, the quality is at about 75% but the strengh is virtually non existent, i have today swapped the multiswitch and tap but the problem is still there, i have run cables from the multiswitch straight to the sky+ box as to by-pass the cables in the walls but that didn't help either, there have not been any reports of problems from any of the other 4 floors...any ideas
got a bit of a problem with a cascade system, all five floors (except the top floor)have 1 tap (varying losses) and 1 mains powered multiswitch, the 2nd floor is having problems with reception on sky, the quality is at about 75% but the strengh is virtually non existent, i have today swapped the multiswitch and tap but the problem is still there, i have run cables from the multiswitch straight to the sky+ box as to by-pass the cables in the walls but that didn't help either, there have not been any reports of problems from any of the other 4 floors...any ideas
