SELECTRIX
Member
- Joined
- Mar 9, 2006
- Messages
- 2
- Reaction score
- 0
- Points
- 0
- Age
- 47
- My Satellite Setup
-
C-tech 2100 1ci 1card reader 90cm dish sg2100 motor mount.
Athlon xp64 win XP
- My Location
- Nr Derby
I'm having major problems trying to figure out how to get the angle on the dish bracket scale.
The mount scale for my latitude (52) i've set fine.
Its the dish bracket n declination angle i cant get.
The dish has a scale 0 to 60 degrees on the bracket.-the 0 side of this scale is nearest the motor, the 60 nearest the dish.
When setting the angle as you look side on at scale do you count the angle to-
the downward stick of the letter Y which is visible through the adjustment slide?
the right hand edge of the adjustment nut?
or the left hand edge of the adjustment nut?
according to the motor manual for my latitude the dish bracket angle minus the declination should be 22.5 degrees-is this correct?
I'd really appreciate your help with these points, also if someone could post a close up photo of their dish scale to aid me in this it would be extremely usefull.
Many Many thanks in advance
Selectrix ! < me at the minute
The mount scale for my latitude (52) i've set fine.
Its the dish bracket n declination angle i cant get.
The dish has a scale 0 to 60 degrees on the bracket.-the 0 side of this scale is nearest the motor, the 60 nearest the dish.
When setting the angle as you look side on at scale do you count the angle to-
the downward stick of the letter Y which is visible through the adjustment slide?
the right hand edge of the adjustment nut?
or the left hand edge of the adjustment nut?
according to the motor manual for my latitude the dish bracket angle minus the declination should be 22.5 degrees-is this correct?
I'd really appreciate your help with these points, also if someone could post a close up photo of their dish scale to aid me in this it would be extremely usefull.
Many Many thanks in advance
Selectrix ! < me at the minute