bluedrops
Member
- Joined
- Jun 5, 2005
- Messages
- 2
- Reaction score
- 0
- Points
- 0
- Age
- 43
- My Satellite Setup
-
Dish setup: Gibertini 1m, Moteck SG2100A H-H motor
Receiver: KAON PVR KSC-570H HW: 13.41.6D SW: 13.05.03 HDD 80 Go / 7200 RPM
DVB card: Technotrend Premium DVB-S rev. 1.5
CAM: Dragon rev. 3.01
Cards: Fun6, Fun7
Programmer: Infinity USB Phoenix
- My Location
- Belgium
Hi to all,
I would like to buy this hardware :
- STAB DISEqC 1.2 motor HH120
- Stab MS220 DISEqC 1.2 positionner (to control the motor and deliver needed current to it because DVB cards do not supply enough current for motors)
http://www.stab-italia.com/inglese/rotorsat_eng/rotorsat_eng_hh120.html
http://www.stab-italia.com/inglese/rotorsat_eng/rotorsat_eng_ms220.html
I have a monoblock twin head for Astra and Hotbird (Maximum MBT-22:
dual LNB head with integrated DiseqC 2.0 switch and two independant
outputs). Could I switch between LNB-A <-> LNB-B through MS220 and
HH120 ? I want to keep the monoblock for fast switching between Astra and
Hotbird in 13° east motor position.
My setup will look like this :
DVB card -> MS220 -> HH120 -> monoblock twin
Second receiver -----------------------^
Thanks for your help.
I would like to buy this hardware :
- STAB DISEqC 1.2 motor HH120
- Stab MS220 DISEqC 1.2 positionner (to control the motor and deliver needed current to it because DVB cards do not supply enough current for motors)
http://www.stab-italia.com/inglese/rotorsat_eng/rotorsat_eng_hh120.html
http://www.stab-italia.com/inglese/rotorsat_eng/rotorsat_eng_ms220.html
I have a monoblock twin head for Astra and Hotbird (Maximum MBT-22:
dual LNB head with integrated DiseqC 2.0 switch and two independant
outputs). Could I switch between LNB-A <-> LNB-B through MS220 and
HH120 ? I want to keep the monoblock for fast switching between Astra and
Hotbird in 13° east motor position.
My setup will look like this :
DVB card -> MS220 -> HH120 -> monoblock twin
Second receiver -----------------------^
Thanks for your help.