Hi banger,
you state you have a dragon loader, is this a PIC card or does it have Fun 7 written on it ?
Are you experiencing problems writing to the loader card with your programmer, which programmer drivers are you using and where are you experiencing the problem ?
After writing to the card you must follow the loading instructions exactly.
The most important thing is to follow the howto.txt step by step when loading your Dragon Cam, as a mistake can damage your Cam.
Make sure your receiver is tuned to a FTA channel, I use BBC world, turn off your receiver.
Insert the programmed card into the Dragon module, chip face up. If the Cam is not already in the receiver, insert this into your receiver and turn on the receiver.
Go to the Common interface menu on the receiver, and select the "Dragon Loader" module.
In the next menu, select "yes, Load module".
Now a menu appears indicating that loading is in progress. To see the actual progress percentage, select "refresh". There is no auto-refresh because some receivers had problems with that....
When loading is complete, a menu appears saying "Loading successful". REMOVE the loader card from the module, and switch off and turn back on the receiver.
Please post back with more details of your problem.
Best wishes
Mickha