2. Download the firmware for your receiver model, rename its name to flash.bin and copy it to the root of the USB flash drive. (the bootloader must be fine)Allegedly a recovery tool, but I can't see a file anywhere
did taking the cover off kill it? probably blown your chance of a refund.
And........ success.
Connecting the receiver a the supply and starting from around 3V, slowly increasing the voltage to 7V (where the board lights start to flicker), and holding there for a minute or so before disconnecting appears to have cleared the fault.
Does anyome have a more modern firmware than 1.28 ?
1.28 appears to be the latest..not seen anything more recent..And........ success.
Connecting the receiver a the supply and starting from around 3V, slowly increasing the voltage to 7V (where the board lights start to flicker), and holding there for a minute or so before disconnecting appears to have cleared the fault.
Does anyome have a more modern firmware than 1.28 ?
Thanks, will work with what I have then.1.28 appears to be the latest..not seen anything more recent..
Hmmmm.The power supply that came with it (rated at 12V, 1A) continues to be a pile of poo. I may break open to see what is not inside.
That capacitor near BD1,C8 looks like a dry joint??...basically cheap crap..Hmmmm.
CH, a little guidance please.----------------------------
The power supply that came with it (rated at 12V, 1A) continues to be a pile of poo. I may break open to see what is not inside.
The additional current will be for the wifi connection, the dedicated chip and losses switching it on.Mine not arrived yet , I see the description states *Note: in case use STB as finder, use UPS with 12v/1.5A output . Why not just supply it with that then.
Obviously it's.a Cheap psu to begin with
I have multiple PSU 12v 2a and 3a knocking about, may be compatible
Mine was missing batteries too. No problem. Bear in mind that this is a Chinese unit, not a German or Greek or English version. The level is low but wellbuilt, moreover the app and the software is at its highest, don't forget ! Russian developer is doing a good job. I miss UHD section......... but with my Edision OsMio4k plus is not a problem.Mine was missing batteries.
The lack of a second USB port was my initial criticism.
While I can't prove it I think this receiver was originally terrestrial (or cable) only, then the company thought iof adding the dual tuner to improve specification and sales.