outoforbit
Member
- Joined
- Nov 8, 2004
- Messages
- 3
- Reaction score
- 0
- Points
- 0
- Age
- 60
Hello to all..my first post !.I need help !
I was given a Grundig Skydigibox , dish and the original Viewing card.(I do not have a viewing card/subscription of my own as yet)(I am in the UK just North Of London).
The Dish I have fitted to the wall,then a signal meter was used to align the dish and after reconnecting the LNB to the Digibox went to the "Setup/signal test" menu and looked at the indications .They were Full signal strength,also upwards to 70% signal quality.
Lock Indicator says OK .Network ID says 0002 and Transport Stream says 07d4.
I switched off all power to the Digibox and the switched it back on after about 2 mins.(I found that the Set Up/signal test page indications were the same)
On the program / channel listings page I get all the program details/schedule.The clock is running tells the correct time.
How ever when I select to view a channel for example BBC1 the screen says "No Signal Received"?.plus of course no picture .
What could cause this ?
I would be grateful if anyone can help !
I was given a Grundig Skydigibox , dish and the original Viewing card.(I do not have a viewing card/subscription of my own as yet)(I am in the UK just North Of London).
The Dish I have fitted to the wall,then a signal meter was used to align the dish and after reconnecting the LNB to the Digibox went to the "Setup/signal test" menu and looked at the indications .They were Full signal strength,also upwards to 70% signal quality.
Lock Indicator says OK .Network ID says 0002 and Transport Stream says 07d4.
I switched off all power to the Digibox and the switched it back on after about 2 mins.(I found that the Set Up/signal test page indications were the same)
On the program / channel listings page I get all the program details/schedule.The clock is running tells the correct time.
How ever when I select to view a channel for example BBC1 the screen says "No Signal Received"?.plus of course no picture .
What could cause this ?
I would be grateful if anyone can help !