Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
Backup your original firmware with the program sbflash102.exe, you can get it off the net.
You have to run it under win98 compatibility mode if you are running winxp.
Backup many times, and compare each with a hex editor to make sure they are identical.
When you have 2 or 3 dumps that are the same, try loading hevet800/1000 or onwa x2
Sky HD, TM6800HD, Manhattan Plaza ST550 and TM1500 CI+. 1.0m dish and 36v motor, Panasonic DVD HDD recorder and Panasonic video/DVD recorder. Sony G800 HD TV stand/surround system + Sony KDL40W2000. Infinity USB, Elvis, CAS1, CAS2.
Other firmware that should work on the globo digital 800:
Lazer2003fta (2meg version)
To edit the channel list, use SCeditor5.3 or neoboxmanager2.50
I downloaded the factory firmware and tested it on another brand
receiver that the firmware listed above also works.
Said firmware will also work on an FMD SRK-5518-fmd receiver.
They all use PBI brand firmware.
Sorry to kind of hijack this thread, but can anyone help with my Globo reciever at all? I have the 'Digital 5000' model, but all I've been able to find about patching is in Polish! (Although it would make sense as I bought the box over there).
The page I've found is here - http://laki.dvhk.pl/faq/tomy/5000/globo.html - if anyone can provide an English translation or give me a rough idea as to what to do it would be most appreciated.
Thanks in advance.
[Mods: Apologies if any of this is against the rules, I keep my eye on so many forums its hard to keep track on whats allowed where!]
Can anyone help me i have a globo digital 500 OTA and i`m trying to find a path to discramble some chanels,i do not know for sure if it is digital 500 or a 400s.
the flash has 1Mb
i tried lazer fta 2003 patch---receiver KO (1Mb)
i tried hevet 500 patch ------receiver KO (1Mb)
Can anyone help me to find a patch???---(slugworth)
i leave a receivers foto just in case.....
The receiver looks like a 400s, but the remote doesn't look like a globo
remote. The sw version doesn't match the factory 400s rev.
If you could jtag it, maybe you could get more info from looking at the
bin file. Could it be a terrestrial receiver?
Hello slugworth thanks for the ansewer
The problem is that i tryed to put in another firmware and i got "stucked",so i went to the orininal site of the receiver,this one: http://www.globo-electronic.de/english/index_download_e.htm , and the firmware of the 500 doesn`t work the one that works is the 400s (DIFG01.8A) this one is OK
About the JTAG,i think i will never get the original bin file!
I went to the store and they said the receiver is for satelite not terrestrial
Thanks for helping