bonez
Member
- Joined
- Oct 6, 2010
- Messages
- 6
- Reaction score
- 0
- Points
- 0
- Age
- 58
- My Satellite Setup
- i havent one yet, but very soon
- My Location
- bristol
Hi everyone,
Having installed the dish setup im having problems aligning. Ive managed to finf 19.2E (Astra), (this is at 10 on the motor dial),, I then entered my long' and lat' in the reciever settings, The reciever is a Dreambox 500S. I thought this would then just be case of selecting a position, say 18.0E and the motor would auto to that position. But its not happening. The motor is aligned to the mounting pole. Is this correct what ive done?
If not, can someone in laymans terms give me the easist solution.
Also whats the difference using Disecq or USALS ?,
(Dish is 1M)
Any help appreciated please
Rich
Having installed the dish setup im having problems aligning. Ive managed to finf 19.2E (Astra), (this is at 10 on the motor dial),, I then entered my long' and lat' in the reciever settings, The reciever is a Dreambox 500S. I thought this would then just be case of selecting a position, say 18.0E and the motor would auto to that position. But its not happening. The motor is aligned to the mounting pole. Is this correct what ive done?
If not, can someone in laymans terms give me the easist solution.
Also whats the difference using Disecq or USALS ?,
(Dish is 1M)
Any help appreciated please
Rich