I got a zeta cam blue now what.

A

ammacher

Member
Messages
8
Likes
0
My Satellite Setup
motorised dish and a TM7755
My Location
kent
#1
hi, I have bought a zetacam blue I have a tm 7755 I have put the cam in but what do I do now?
might sound stupid but it's my 1st cam.
does the cam unencrypt channels on it's own or do I have to put a card in it.
also what satellite should it be pointing at?
thanks in advance....ammacher.
 
A

Azoum

Member
Messages
1
Likes
0
My Satellite Setup
Starcom
My Location
germany
#2
i thimk you must have card or programm in your cam!
 
closetosoton

closetosoton

More dishes than Sense.
Messages
502
Likes
0
My Satellite Setup
Wavefield T55, 20 LNB's and a whole load of analogue boxes!
My Location
Close to Southampton
#3
no, you don't need a card. you've purcahsed a cam with all the necesary decryption algorythms and keys built it.

i assume you have a receiver? you need a non-sky box with at least one-CI (common interface slot) and an 80cm dish (or 60cm south uk).

then point it at Hotbird 13 degrees east and tune your channels in:

Full X1 can be found on this transponder:

Hotbird 6 (13.0E) - 12577.00 H - DVB - 27500 3/4 - NID: 318 - TID: 9300 - Txp: 93 - Beam: Europe

for details of your other channels, consult this:

http://www.kingofsat.net/en/pos-13E.php

basically if you've got a receiver pointed at 13E with all transponders tuned in it will sort it self out and your eyes can pop out of their sockets until you're all porned out.

cts
 
A

ammacher

Member
Messages
8
Likes
0
My Satellite Setup
motorised dish and a TM7755
My Location
kent
#4
thanks, sussed it out now.....ammacher
 
P

PCD

DB Magician
Messages
632
Likes
1
#5
ammacher said:
thanks, sussed it out now.....ammacher
Apart from fullx 1 and 2 (and fullx 3 on 19e), you will be able to watch many other channels like multivision tps and absat channels on 13e if you connect the cam to a pc using a season interface card. Regards.
 
W

Wattoo

Regular Member
Messages
48
Likes
0
#6
PCD said:
Apart from fullx 1 and 2 (and fullx 3 on 19e), you will be able to watch many other channels like multivision tps and absat channels on 13e if you connect the cam to a pc using a season interface card. Regards.
How I can watch tps and other by attaching cam to pc and cas interface . please tell me the procedure in detail or help link.Thanks
 
P

PCD

DB Magician
Messages
632
Likes
1
#7
Wattoo said:
How I can watch tps and other by attaching cam to pc and cas interface . please tell me the procedure in detail or help link.Thanks
Not 'cas interface', it is the 'season interface card' you need. This card costs about £10 or so in the UK. To watch tv with it, you must have the pc on and connected through the serial port using a serial lead. If you get the season interface card and a serial lead, I will be pleased to explain the software method. Regards, pcd.
 
H

hoss6800

Member
Messages
5
Likes
0
My Satellite Setup
manhattan 6800
sony laptop
My Location
uk
#8
PCD said:
Apart from fullx 1 and 2 (and fullx 3 on 19e), you will be able to watch many other channels like multivision tps and absat channels on 13e if you connect the cam to a pc using a season interface card. Regards.
i have a cas interface 3 progremmer. will i be able to carry out the procedure with this insted of season interface card.:confused If the answer is yes, would you be kind and let me know what to do,
many thanks
 
P

PCD

DB Magician
Messages
632
Likes
1
#9
hoss6800 said:
i have a cas interface 3 progremmer. will i be able to carry out the procedure with this insted of season interface card.:confused If the answer is yes, would you be kind and let me know what to do,
many thanks
See my reply to your pm. Full details are in the Duolab site. Regards, pcd.
 
A

antero

Member
Messages
3
Likes
0
#10
hello, i'm newbie i've never programmed a card; i've bought a zeta cam and a season interface card. How can i program it so i could watch t*p*s* channels? Thank you all
 
P

PCD

DB Magician
Messages
632
Likes
1
#11
antero said:
hello, i'm newbie i've never programmed a card; i've bought a zeta cam and a season interface card. How can i program it so i could watch t*p*s* channels? Thank you all
There are 2 methods :-

(1) Using the season interface card. For this you need to connect the card all the time with the pc with a 9 pin serial lead (not the null modem lead).

or

(2) You can program the cam with a Cas Interface.

Are you willing to use the first method ?

Regards, pcd.
 
M

mikk

Regular Member
Messages
84
Likes
0
#12
After re-programming using cas interface, are the embedded channels left intact? and which is the best fw?
 
J

joshjess

Regular Member
Messages
28
Likes
0
#13
mikk said:
After re-programming using cas interface, are the embedded channels left intact? and which is the best fw?
The easiest way for him to watch Multivisoon etc is to patch the Technomate instead of having to buy new gear for the cam.
 
Top