interface fore a Echostar LT8700

[Johan]

Hallo,my name is Johan.
çan some-body help méé with an interface,i'ff cot an interface for a Echostar LT8700,and wonne build it in.Now is the problemn the Main-board i'll séé the name:RS232 intfc with 8 pins,witch pins must i use to connect it with the Interface.
Mvg:Johan

 

[Llew]

Hello Johan, welcome to the forum.

What is the interface for? If it's just for transmitting and receiving data to a terminal program, you only need pins 2 and 3, and pin 5 for ground. In which case an RS232 null cable will be fine.

 

[Johan]

Hello Johan, welcome to the forum.

What is the interface for? If it's just for transmitting and receiving data to a terminal program, you only need pins 2 and 3, and pin 5 for ground. In which case an RS232 null cable will be fine.

Hallo Liew:I'ff got an Nokia Media Master 9500,and wonne connect it
with the Echostar LT8700.You now the answer??
Which is pin :2 and 3 and5,how must i séé that?Is it when i look to/or at the Front off the LT8700?Doe you have a picture off it?
Sorry fore my poor Englis
Mvg:Johan

 

[Llew]

I can only refer you to the Setedit site, where there is some information on setting up the link between a Nokia 9600 Mediamaster (presumably similar) and LT8700, using a straight RS232 cable (not a null cable) -

_http://www.setedit.de/ltunddvb_it.html

I only have the earlier Echostar SR8700 receiver without RS232, so can't help there.

 

[Johan]

I can only refer you to the Setedit site, where there is some information on setting up the link between a Nokia 9600 Mediamaster (presumably similar) and LT8700, using a straight RS232 cable (not a null cable) -

_http://www.setedit.de/ltunddvb_it.html

I only have the earlier Echostar SR8700 receiver without RS232, so can't help there.

I only won too now is: pin 2,and pin 3,and pin 5
that is all i ask,pleas,pleas,pleas.
Mvg:Johan

 

[Llew]

Numbering and pin allocation of a 9-pin RS232 here -

_http://www.interfacebus.com/RS232_Pinout.html

 

[Johan]

Numbering and pin allocation of a 9-pin RS232 here -

_http://www.interfacebus.com/RS232_Pinout.html

Sorry fore the miss-understanding,but what i whant to now is:
the 3 (from the 8)pins on the Print
Mvg:Johan

 

[Johan]

Sorry fore the miss-understanding,but what i whant to now is:
the 3 (from the 8)pins on the Print
Mvg:Johan

I believe i have found it,it's writing on the print(near the pins).
Thank's any-way
Johan:-hny

 

[Llew]

OK, thought you already had the connector on the backplate.

Season's greetings to you too :-pachrist

 

[Johan]

OK, thought you already had the connector on the backplate.

Season's greetings to you too :-pachrist

I thought i had found it, but No(shit,shit,shit)
Gr:Johan