Hello,
i have KSF 570, which I was told was 16.C0.A1 :| now after what happened not sure.
I did a firmware upgrade, the download was OK, but now the receiver is dead and shows only an "8" on the front display. This is the output of the KUP 230:
File open O.K.!
> Old version binary.
-. Target loader version :L 219
-----------> Front :: 74HC164 used (connector: 14pin)
-----------> Target 2M Flash.
-----------> Target AMD/ST FLASH(TOP).
Connect Success
//==================================================
// FileInfo: AT-7010DZ, H/W(16.C0.A1), S/W(22.00.07)
// Target: L 219, u-C[0] , FLS[2M], KAON TEAM, H/W(FF.00.FF), S/W(03.00.00)
//==================================================
Target Model Mismatch : KAON TEAM
The set-set-box eeprom/flash is blank!
The eeprom data: 0, 8,b9,KAON TEAM , 3, 0, 0,ff, 0,ff
DownLoad Start
DownLoad Success
DownLoad CRC Check OK
Flash Write Start
Flash CRC Check OK
Upgrade End
What should I do? Any suggestions? Please help.