Vinniek
Member
- Joined
- Sep 7, 2005
- Messages
- 20
- Reaction score
- 1
- Points
- 0
- Age
- 56
- My Satellite Setup
- DB500, DM800 (snide), MBOX cam, DiSEqC Motor
- My Location
- London
Thanks to Rolfw and wod for the replies to my previous set up question, with there help I sort of got it right first time.
I loaded the PET123 settings file on my DreamBox and set up the motor configuration settings.
I selected BBC Prime and the dish turned to Thor (0.8W), and I then tilted my dish till I got a good signal.
Now I get a good snr of around 80% on all the popular satellites all the way around the arc from 30W to 42E.
The only problem is the snr on 28E and 16E is below 50% and I cant lock on these two sats.
I have used the DB to select a channel on 28E, adjusted the dish slightly to get a snr of 80%, and then all the other sats have a low snr and I cant lock on them!
Do I need to skew the LNB or alter something on the motor, or does the dish have to slide up or down on the motor arm, I have fixed it roughy center on the vertical motor arm?
Thanks again for any help
I loaded the PET123 settings file on my DreamBox and set up the motor configuration settings.
I selected BBC Prime and the dish turned to Thor (0.8W), and I then tilted my dish till I got a good signal.
Now I get a good snr of around 80% on all the popular satellites all the way around the arc from 30W to 42E.
The only problem is the snr on 28E and 16E is below 50% and I cant lock on these two sats.
I have used the DB to select a channel on 28E, adjusted the dish slightly to get a snr of 80%, and then all the other sats have a low snr and I cant lock on them!
Do I need to skew the LNB or alter something on the motor, or does the dish have to slide up or down on the motor arm, I have fixed it roughy center on the vertical motor arm?
Thanks again for any help