My Arion 1500E is dead - please help!!

S

she12126

Regular Member
Messages
14
Likes
0
#1
I flashed it with "3018SE_TSR_na_TSR_15[1].1.buc" and it is stucked on a flashing 8.8.8.8., it won't take any re-flashing and always shows "Download fail". I do not know what to do. Please help me to solve this problem. Thanks in advance!
 
N

nr66

Regular Member
Messages
55
Likes
0
#2
Hi she12126,
it looks like it's a bad upgrade and the only way to restore ur receiver is by erasing and reprogramming the flash memory.it's a little bit tricky but manageble if u don't mind a bit of DIY(Do It Yourself).
-first, u need to make a JTAG cable, JKEYS softawre and bin.file for ur receiver's
flash memory.
-lunch JKEYS to flash programming(erase full then reprogram) if successful then,
-start ARIONER to download the right boot this time and then the latest firmware.
more details about the procedure in www.ucascity.com presented by yesyes85.
good luck,
regerds,
nr66
 
S

she12126

Regular Member
Messages
14
Likes
0
#3
I will try to JTAG my Arion 1500E and inform you of the results.

Thanks again!

She12126
nr66 said:
Hi she12126,
it looks like it's a bad upgrade and the only way to restore ur receiver is by erasing and reprogramming the flash memory.it's a little bit tricky but manageble if u don't mind a bit of DIY(Do It Yourself).
-first, u need to make a JTAG cable, JKEYS softawre and bin.file for ur receiver's
flash memory.
-lunch JKEYS to flash programming(erase full then reprogram) if successful then,
-start ARIONER to download the right boot this time and then the latest firmware.
more details about the procedure in www.ucascity.com presented by yesyes85.
good luck,
regerds,
nr66
 
S

she12126

Regular Member
Messages
14
Likes
0
#4
Dear nr66,

I did not jtag my Arion 1500E, instead, I reflashed it with "S170EC_SPR_A2733_20040120_AUCPC.auc" but I got LANG with no TV pictures when connected to TV. I am 100% sure that the connection to TV is correct, so I failed again. Any advice? Please help! Thanks again.

she12126

nr66 said:
Hi she12126,
it looks like it's a bad upgrade and the only way to restore ur receiver is by erasing and reprogramming the flash memory.it's a little bit tricky but manageble if u don't mind a bit of DIY(Do It Yourself).
-first, u need to make a JTAG cable, JKEYS softawre and bin.file for ur receiver's
flash memory.
-lunch JKEYS to flash programming(erase full then reprogram) if successful then,
-start ARIONER to download the right boot this time and then the latest firmware.
more details about the procedure in www.ucascity.com presented by yesyes85.
good luck,
regerds,
nr66
 
Top