Nc+

  • Thread starter sheffieldsatellite
  • Start date
sheffieldsatellite

sheffieldsatellite

Regular Member
Messages
196
My Satellite Setup
Mut@nt HD51
Nbox 5800S
Triax TD110
Sky zone 1 minidish
Inverto Black Ultra
Alsat Superior Dark Motor
Onkyo TX-SR605
My Location
Sheffield
brought an official NC+ subscription & Conax cam however the channels arent clearing & all the seller keeps saying is NC+ say its active, to rung NC+ if i dont believe them (iv asked for NC+'s number but the seller hasnt given it me) & that my receiver must be faulty (iv used other cams with it before & never had any problems) iv sent the seller pictures that show nothing is clearing, not sure what othet proof they need. iv asked them to get the activation signal resent but they wont accept theres a problem & so wont get it resent. what whould i do here find someone from Poland to help me, open a Paypal dispute ? i ordered it in 19th & it came on 22nd so should be active by now.
 

Attachments

Last edited:
Channel Hopper

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Messages
29,975
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
What happens when you press OK for subscription status ?

Is it from one of the forum sponsors, (past or present ) ?

Have you tried the card / cam on a completely different system ?
 
sheffieldsatellite

sheffieldsatellite

Regular Member
Messages
196
My Satellite Setup
Mut@nt HD51
Nbox 5800S
Triax TD110
Sky zone 1 minidish
Inverto Black Ultra
Alsat Superior Dark Motor
Onkyo TX-SR605
My Location
Sheffield
What happens when you press OK for subscription status ?

Is it from one of the forum sponsors, (past or present ) ?

Have you tried the card / cam on a completely different system ?
it just shows the same page that i took a picture of.

not sure, was from eBay but wasnt the current sponsor. i did check their feedback before tho.

yes iv tried the card in two other recievers one using the cam & the other an official NC+ Nbox 5800S & is exactly the same messages in the Comman Interface menu & nothing clears.
 
Channel Hopper

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Messages
29,975
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
It looks from the image that the card was activated in July 2013 and was renewed for a second month. March 2013 was the first year of satellite broadcast so unless I'm mistaken the card has been around for almost six years
 
sheffieldsatellite

sheffieldsatellite

Regular Member
Messages
196
My Satellite Setup
Mut@nt HD51
Nbox 5800S
Triax TD110
Sky zone 1 minidish
Inverto Black Ultra
Alsat Superior Dark Motor
Onkyo TX-SR605
My Location
Sheffield
It looks from the image that the card was activated in July 2013 and was renewed for a second month. March 2013 was the first year of satellite broadcast so unless I'm mistaken the card has been around for almost six years
thats what i thought, what would you suggest i do ? as the seller is less then helpfull
 
Topper

Topper

Amo Amas Amant Admin
Staff member
Messages
22,928
My Satellite Setup
IDD CI24 ECONO MM Penta 1.20 Galaxy II
1.2Mtr Polar MTG yes it has been on the arc for 25 years and is now fixed on 13 East using two pairs of rusty molegrips. Unlike me they never groan but always perform.
My Location
Blackburn, Lancashire
If you paid by Paypal then open a dispute with them and show them the evidence of the age of the subscription, that should be enough
 
Channel Hopper

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Messages
29,975
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
There is a small chance you have an older style of Conax cam that will not allow the update to occur, which version is on the sticker ?
 
sheffieldsatellite

sheffieldsatellite

Regular Member
Messages
196
My Satellite Setup
Mut@nt HD51
Nbox 5800S
Triax TD110
Sky zone 1 minidish
Inverto Black Ultra
Alsat Superior Dark Motor
Onkyo TX-SR605
My Location
Sheffield
There is a small chance you have an older style of Conax cam that will not allow the update to occur, which version is on the sticker ?
its one of these Smit Conax Hardware Version: 5.1.5.2 CIM Build Date: Oct 20 2017
 
sheffieldsatellite

sheffieldsatellite

Regular Member
Messages
196
My Satellite Setup
Mut@nt HD51
Nbox 5800S
Triax TD110
Sky zone 1 minidish
Inverto Black Ultra
Alsat Superior Dark Motor
Onkyo TX-SR605
My Location
Sheffield
If you paid by Paypal then open a dispute with them and show them the evidence of the age of the subscription, that should be enough
ok will do thank you
 
Topper

Topper

Amo Amas Amant Admin
Staff member
Messages
22,928
My Satellite Setup
IDD CI24 ECONO MM Penta 1.20 Galaxy II
1.2Mtr Polar MTG yes it has been on the arc for 25 years and is now fixed on 13 East using two pairs of rusty molegrips. Unlike me they never groan but always perform.
My Location
Blackburn, Lancashire
sheffieldsatellite

sheffieldsatellite

Regular Member
Messages
196
My Satellite Setup
Mut@nt HD51
Nbox 5800S
Triax TD110
Sky zone 1 minidish
Inverto Black Ultra
Alsat Superior Dark Motor
Onkyo TX-SR605
My Location
Sheffield
Before you do check the original advert to ensure that the wording stated it was a valid subscription
yes i have & it does.

thanks
 
mike1

mike1

Regular Member
Messages
152
My Satellite Setup
30w-60e motorised (64cm triax / black ultra)

Vu solo2

Mutant 51

Tm5402 M3
My Location
UK
Next time buy the nc card with RSA key. So no need for CI module. The rsa key goes in oscam via web interface. I can post more info if required..
I find Engima 2 not great with handling Common Interface modules.
 
sheffieldsatellite

sheffieldsatellite

Regular Member
Messages
196
My Satellite Setup
Mut@nt HD51
Nbox 5800S
Triax TD110
Sky zone 1 minidish
Inverto Black Ultra
Alsat Superior Dark Motor
Onkyo TX-SR605
My Location
Sheffield
Next time buy the nc card with RSA key. So no need for CI module. The rsa key goes in oscam via web interface. I can post more info if required..
I find Engima 2 not great with handling Common Interface modules.
never had a problem before with CI modules & Enigma 2. from what iv read online a few people have needed to get the activation signal resent but this seller wont help or even except theres a problem
 
Captain Jack

Captain Jack

Модератор
Staff member
Messages
11,019
My Satellite Setup
See signature
My Location
North Somerset
Be careful with CI CAMs. Not all receivers are CI+ compatible, though most Enigma2 ones have plugins to make them work - albeit unofficially.
 
sheffieldsatellite

sheffieldsatellite

Regular Member
Messages
196
My Satellite Setup
Mut@nt HD51
Nbox 5800S
Triax TD110
Sky zone 1 minidish
Inverto Black Ultra
Alsat Superior Dark Motor
Onkyo TX-SR605
My Location
Sheffield
Be careful with CI CAMs. Not all receivers are CI+ compatible, though most Enigma2 ones have plugins to make them work - albeit unofficially.
im using a Mutant HD51 which is meant to be CI+ compatible
 
Captain Jack

Captain Jack

Модератор
Staff member
Messages
11,019
My Satellite Setup
See signature
My Location
North Somerset
It is....with the right plugin.
 
sheffieldsatellite

sheffieldsatellite

Regular Member
Messages
196
My Satellite Setup
Mut@nt HD51
Nbox 5800S
Triax TD110
Sky zone 1 minidish
Inverto Black Ultra
Alsat Superior Dark Motor
Onkyo TX-SR605
My Location
Sheffield
Captain Jack

Captain Jack

Модератор
Staff member
Messages
11,019
My Satellite Setup
See signature
My Location
North Somerset
Yep, that's the one.
 
sheffieldsatellite

sheffieldsatellite

Regular Member
Messages
196
My Satellite Setup
Mut@nt HD51
Nbox 5800S
Triax TD110
Sky zone 1 minidish
Inverto Black Ultra
Alsat Superior Dark Motor
Onkyo TX-SR605
My Location
Sheffield
Captain Jack

Captain Jack

Модератор
Staff member
Messages
11,019
My Satellite Setup
See signature
My Location
North Somerset
I think you need to reboot the box but pretty sure it just worked. Without it, I had an error saying that the CI module was not authorised for use in my receiver.
 
Top