Vipersan
Emmett Browns Ghost
- Joined
- Jun 29, 2009
- Messages
- 10,918
- Reaction score
- 6,663
- Points
- 113
- Age
- 66
- My Satellite Setup
-
IP9000HD +
TD110 Dish and TD88 Dish in Tandem
66°East to 60°West.
AZbox PrmHD + OpnbxS9HD + Skybox + DrHD F15
2x VboxII AZ-EL
2 m+ Alcoa PF + BSC421 C-Band lnbf...
+SS2/TwHnS2-3200 pci/TBS6925 pci
1.5 Fortec Star -Gbox - HtoH Ku/Ka/C
- My Location
- UK
Ok ..my turn to ask for some help ..
Basically I want to run a new cable through a wide conduit underground..
The conduit already has one cable in it ...but as we know Sat cable aint good at negotiating right angled bends of which there are 2 in the conduit...
So what I envisaged was attaching a pull through cord to the existing cable ..and dragging this through using the old cable (not fully as thiswould defeat the objective)...thus having a way to now attach a second stiff coax...and dragging a second cable through the conduit.
Hope this makes sense..
So the pull through cord has to be relatively thin (max 1/4 inch) ..strong (high breaking strain) ...flexible (to negotiate bends) ....any suggestions ?
Basically I want to run a new cable through a wide conduit underground..
The conduit already has one cable in it ...but as we know Sat cable aint good at negotiating right angled bends of which there are 2 in the conduit...
So what I envisaged was attaching a pull through cord to the existing cable ..and dragging this through using the old cable (not fully as thiswould defeat the objective)...thus having a way to now attach a second stiff coax...and dragging a second cable through the conduit.
Hope this makes sense..
So the pull through cord has to be relatively thin (max 1/4 inch) ..strong (high breaking strain) ...flexible (to negotiate bends) ....any suggestions ?