Satlook Micro G2

[fincaman]

Hello all, I want to connect my Micro G2 to my computer to update the transponder list. I have bought an RS232 to USB cable and installed the drivers and it is recognised. I gather from the manual that I need micromem.exe to be running where do I get this ?

 

[excollier]

Here you go

 

[fincaman]

Hello and thanks, I am one step further but how do I edit the transponder *.smd file ? I want to change the frequency and symbol rate of the installed Intelsat 907 because they are not correct

 

[excollier]

I can't remember now, I only use the spectrum analyzer to find tps, I just look up a relevant tp for the sat I want from kingofsat.net and then use that frequency to search, usually it finds it pretty quickly, and identify the satellite that has locked.

 

[fincaman]

Hello Again, yes that's what I did but I'd like to have it programmed in
Anyone else ?

 

[fincaman]

Hello again, while I'm on I've been looking for new batteries because Emitor charge a fortune for them

 

[excollier]

I just ordered one from Creative Satellite the other day, the dealer I bought the meter from originally.

http://creativesatellite.co.uk/contents/en-uk/d239_Meter_batteries.html

 

[fincaman]

Hello Again, sorry but they are charging too much so I'm Going to say "no to Emitor" I have ordered ten 3000 mah batteries for £3.00 I'm going to make a battery pack

 

[excollier]

Good idea.

 

[jaimauk]

Hi.
Which usb drivers are you using, I cannot get my Satlook micro+ to work with the fdl.exe programmer?
I am using usb to rs232 and keep getting overrun check XON-OFFX
it's stuck on program mode (all 8 led lit)
Could you upload the usb driver(s) please?
Also would you happen to have the satlook micro+ original firmware by any chance?
I truly appreciate any help!

Thanks very much