setting receiver help

den123

Regular Member
Messages
301
Likes
16
My Satellite Setup
ddcccccc
My Location
uk
#1
hi do i have to set the motor with the frequences then do the chanel search after then store them in. i have stored chanels earler have now lost them think i might be doing somethin wrong i have a humax 2000hd reciver going get a tm1500ci monday thanks guys for all your help what a great site thanks:confused
 

Llew

cerca trova...
Staff member
Messages
14,429
Likes
3,383
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
#2
den123, try to stick to one thread in your quest to set up your Humax and motor. You're all over the place in this section, otherwise it's difficult for you and those trying to help otherwise.

You set your motor with your locality's coordinates using the Diseqc 1.2 or USALS function in the Humax Antenna Menu (before you do any channel searching).

Llew
 

den123

Regular Member
Messages
301
Likes
16
My Satellite Setup
ddcccccc
My Location
uk
#4
hi guys have finale finished the set up with your help can you please tell me how many satelites i should pick up from where i am in the uk exeter thanks again :-rofl2
 

den123

Regular Member
Messages
301
Likes
16
My Satellite Setup
ddcccccc
My Location
uk
#5
how many satelites should i pick up in uk thanks 1meter dish ect motorised
 

CROSSBONES

Specialist Contributor
Messages
2,001
Likes
189
My Satellite Setup
1.2m channel master on a jeager 1224 motor. 55cm fibo Gregorian. VU solo2.
My Location
S.Wales
#6
check out lyngsat for foot prints etc;)
 

Topper

Amo Amas Amant Admin
Staff member
Messages
21,649
Likes
3,290
My Satellite Setup
IDD CI24 ECONO MM Penta 1.20 Galaxy II
1.2Mtr Polar MTG yes it has been on the arc for 25 years and is now fixed on 13 East using two pairs of rusty molegrips. Unlike me they never groan but always perform.
My Location
Blackburn, Lancashire
#8
Try to imagine a torch beam coming out of the transponder and shining on the earth, each transponder has a footprint so go to here select your satellite as in here then look for the column called beam and click on the blue name to display that transponders footprint as here for Astra 1G
 

Topper

Amo Amas Amant Admin
Staff member
Messages
21,649
Likes
3,290
My Satellite Setup
IDD CI24 ECONO MM Penta 1.20 Galaxy II
1.2Mtr Polar MTG yes it has been on the arc for 25 years and is now fixed on 13 East using two pairs of rusty molegrips. Unlike me they never groan but always perform.
My Location
Blackburn, Lancashire
#10

CROSSBONES

Specialist Contributor
Messages
2,001
Likes
189
My Satellite Setup
1.2m channel master on a jeager 1224 motor. 55cm fibo Gregorian. VU solo2.
My Location
S.Wales
#11
well explained Topper m8y;)
 
Top