Settings for THOR 1W

mick2me

Regular Member
Messages
287
Likes
0
My Satellite Setup
'Fortec Star Passion' (& a dead SL65) One of them big Woks on the outside, and a thingy that moves it about a bit.
My Location
Nottingham
#1
I am located at 1W

I want to use THOR 1W for setting up my dish motor

The SL65 receiver does not have THOR 1W setup in its memory.

What settings do I have to input in the SL65 for adding THOR 1W to its list of satelites?

Thanks

Mick T
 

Analoguesat

Administrator
Staff member
Messages
45,484
Likes
8,219
Location
Scottish Borders
My Satellite Setup
TM 5402HD
Skybox F3
Sky+ UK.
My Location
Scottish Borders
#3
mick2me said:
I am located at 1W

I want to use THOR 1W for setting up my dish motor

The SL65 receiver does not have THOR 1W setup in its memory.

What settings do I have to input in the SL65 for adding THOR 1W to its list of satelites?

Thanks

Mick T

Just modify the settings for one of the Asian birds you will never use.
 
J

Jeff_19341

Guest
#4
Hi mick2me

Does your receiver have a satellite named as "Intelsat 10-02"?
If so that is the other bird to use at 1*west.
 

Rob

Regular Member
Messages
1,397
Likes
3
My Satellite Setup
Technomate TMS-1500 CI+ "patched" receiver, 90cm p/f 36v motorised dish, Inverto C120 0.3db LNB, Moteck V-Box 2, Packard Bell 6052 XP Home computer, Toshiba A60 laptop, and lots of Russian Vodka !
My Location
Essex
#6
Check this out my lordship :)
http://www.kingofsat.net/en and then click on Thor and it will show you everything on there, that's Thor 2 & 3 and Intelsat 10-02.

All depends what you call worthwhile, but I think it's a pretty dull sat.

Give it the :-Guill
 

jakenl

Regular Member
Messages
74
Likes
0
My Satellite Setup
Manhattan Starlight 5900+PVR-80GB,Topfield TF5000CI,Skystar2,110cm dish, Invacom 0,3dB, Moteck SG2100A,range: 75East-61West,AMD Sempron 2600+, Windows XP Pro.
My Location
The Netherlands
#8
When I read it correctly, the channels on Thor are of no interest to him, he just wants to use this sat to set up his motor, right?

Go to your settings menu, choose Add satellite, use a transponder with constant signal, f.i. 11247 V, 24500 7/8 (Telenor) and turn the mast with motor fixed at 0 degrees until signal is received and tighten mast. Search for channels if you want and save.

Goodluck.

Jakenl
 

mick2me

Regular Member
Messages
287
Likes
0
My Satellite Setup
'Fortec Star Passion' (& a dead SL65) One of them big Woks on the outside, and a thingy that moves it about a bit.
My Location
Nottingham
#9
jakenl said:
When I read it correctly, the channels on Thor are of no interest to him, he just wants to use this sat to set up his motor, right?

Go to your settings menu, choose Add satellite, use a transponder with constant signal, f.i. 11247 V, 24500 7/8 (Telenor) and turn the mast with motor fixed at 0 degrees until signal is received and tighten mast. Search for channels if you want and save.

Goodluck.

Jakenl
I havent got a clue whats on THOR, but its due south of me, so best for motor setup.

Thanks for the replies I will peruse the info and hopefully it will help me with my problem.

Intelsat is not pre programmed? I take it this is a different sat at the same location? 1W?
 

Lancelot

Specialist Contributor
Messages
3,638
Likes
8
My Satellite Setup
SS1.
125cm Gibbi with Channelmaster feedhorn and Inverto C120 twin.
36v H to H 62E - 61.5W
My Location
South central
#10
Have a look HERE.

Useful little tool. You will need Acrobat Reader though.


L. :)
 

Rob

Regular Member
Messages
1,397
Likes
3
My Satellite Setup
Technomate TMS-1500 CI+ "patched" receiver, 90cm p/f 36v motorised dish, Inverto C120 0.3db LNB, Moteck V-Box 2, Packard Bell 6052 XP Home computer, Toshiba A60 laptop, and lots of Russian Vodka !
My Location
Essex
#11
jakenl said:
When I read it correctly, the channels on Thor are of no interest to him, he just wants to use this sat to set up his motor, right.
Wrong, that post was for the post in front of me from lordgarretty not the original one from mick2me.

"Is there anything worthwhile on Thor - without a legit sub".
 

jakenl

Regular Member
Messages
74
Likes
0
My Satellite Setup
Manhattan Starlight 5900+PVR-80GB,Topfield TF5000CI,Skystar2,110cm dish, Invacom 0,3dB, Moteck SG2100A,range: 75East-61West,AMD Sempron 2600+, Windows XP Pro.
My Location
The Netherlands
#12
Rob said:
Wrong, that post was for the post in front of me from lordgarretty not the original one from mick2me.

"Is there anything worthwhile on Thor - without a legit sub".
Okay, you got me there, Rob.
Indeed my reply was ment for Mick2me.
Sorry.

Jakenl
 

Rob

Regular Member
Messages
1,397
Likes
3
My Satellite Setup
Technomate TMS-1500 CI+ "patched" receiver, 90cm p/f 36v motorised dish, Inverto C120 0.3db LNB, Moteck V-Box 2, Packard Bell 6052 XP Home computer, Toshiba A60 laptop, and lots of Russian Vodka !
My Location
Essex
#13
No problem Jakenl, we welcome your input. :)
 

mick2me

Regular Member
Messages
287
Likes
0
My Satellite Setup
'Fortec Star Passion' (& a dead SL65) One of them big Woks on the outside, and a thingy that moves it about a bit.
My Location
Nottingham
#14
Thanks for the PDF Lancelot
Very useful

I dont have Intelsat as mentioned?

I am a novice so I am not sure what I have to input for new satellite properties?
 

misterminibus

Specialist Contributor
Messages
1,012
Likes
0
Location
Lancashire
My Satellite Setup
Kodi
My Location
Lancashire
#15
Hi mick have you got anywhere with a patch yet?
I have come across someone who says he can get multivision 1-7 which are excellent movies and tps which is a bit like sly 1 and stuff.
check this out.
_http://www.gccadm.net/forum/viewtopic.php?t=40153&postdays=0&postorder=asc&start=0&sid=36b54026d11e592bbeb51a216a0a4634

looks hopeful
Regards
Daren
 
Top