i think first i need to buy a dragon tail right ?,
Yes , or you can try this with USB hub from a old PC.
If you decide to do this
PLEASE BE CAREFULL and isolate the ( under ) side of the USB print board with isolating tape at the points where the print board contacts the screw pins . Otherwise you get a short circuit and kill your box )(-red.
Note that only one USB port on the hub will work.
or what is the setup that you are using with your USB stick .an example of what you keep on the stick would be greately appreciated .
I have in my USB : emus , httpd , keys and plugins.
For emus and plugins you don't need to do something special.
1. FTP with TDC the maps ( dir ) emus and plugins from /var to USB
2. Empty the map /var/emus and /var/plugins ( leave them as empty dir in /var )
As for keys and httpd you have to make a link ( hand ) in /var.
1. FTP with TDC the maps ( dir ) keys and httpd from /var to USB
2. Delete the map ( dir ) keys and httpd from var
3. Open telnet in TDC ( click Telnet on the left-side in TDC )
4. Go to the Telnet conversation table (click in the black window on the right side )
5. Type this : cd /var
6. Push enter
7. Type this : ln -s /dev/shm/usb/sd*/keys /var
8. Push enter
9. Type this : ln -s /dev/shm/usb/sd*/httpd /var
10. Push enter
Now you have made links for keys and httpd in your /var .
NOTE !!!!
1. Before you start all this make a copy of your /var to one map in your PC . If you don't get it wright than you can FTP : keys , emus , plugins and httpd back again .
PLEASE don't forget the attribute numbers.
Or you can make a photo of your maps in /var with QuickShot so you always can see what you have in each map in /var and there attributes.
I've done that and is very handy ;)
2.When you type this in Telnet
cd /var
ln -s /dev/shm/usb/sd*/keys /var
ln -s /dev/shm/usb/sd*/httpd /var
Don't forget "space". So you type like this :
cd"push space"/var
ln"push space"-s"push space"/dev/shm/usb/sd*/keys"push space"/var
ln"push space"-s"push space"/dev/shm/usb/sd*/httpd"push space"/var
3. The "ln" above = LN and not In
It looks difficult but it's not.