Hello Guys
All friends having Star Track World-in-Box or World-in-Box II can download latest S/W from
http://www.starsw.com .
After downloading follow these steps to upgrade your boxes.
First of all you need a RS-232 cable.It is not a thing you think to buy or find somewhere.Simple go to nearby computer shop and buy 2 DB9 Female connectors and a piece of vga cable or network cable.You need only 3 wires in it.Now with a solding machine (if you have your own or you can ask for someone to do it) join these connectors to cable such that pin 5 of one connector is connected with pin 5 of other. Pin 2 of fisrt connects pin 3 of other and pin 3 of one connects pin 2 of other.To simplify
you need a combination of
5____5
2____3
3____2
iAfter that you need to remove your world-in-box from setup. (Unplug all cables including LNB cable)
Connect it with your PC through cable you made.
You will find only one place on back panel of your world-in-box where this 9 pin cable fits.Same way you'll find the same place on back of your computer.Now connectivity is done.
Next POWER OFF your world-in-box from button on back side panel.
Run file Arioner(You will find it with S/W package you downloaded) and click Open button on top right corner and browse that auc file.
Next you select COM 1 (If you've connected cable with COM 1 other wise select COM2 because there are only 2 physical com ports available in computer) and click "Send Program to IRD".
Status will show "Waiting for responce".
Now Power ON your world-in-box from back side panel button.
Copying process will start.Dont power off when it is in progress.
When it completes process it will show "Waiting for terminate signal" wait for a moment and then you will get a confirmation popup message of successfully uploaded.
Now You click OK button and Arioner program will exit.
Power Off you world-in-box and power On again it will load new software.
Now you can confirm that new software is uploaded from Information menu in your world-in-box it will show Software version like S841EC_$STK_A4454_20040826
Polsat will work after upgradation.Dont worry.
Thats it...First of all you need a RS-232 cable.It is not a thing you think to buy or find somewhere.Simple go to nearby computer shop and buy 2 DB9 Female connectors and a piece of vga cable or network cable.You need only 3 wires in it.Now with a solding machine (if you have your own or you can ask for someone to do it) join these connectors to cable such that pin 5 of one connector is connected with pin 5 of other. Pin 2 of fisrt connects pin 3 of other and pin 3 of one connects pin 2 of other.To simplify
you need a combination of
5____5
2____3
3____2
After that you need your world-in-box to remove from setup.
Connect it with your PC through cable you made.
You will find only one place on back panel of your world-in-box where this 9 pin cable fits.Same way you'll find the same place on back of your computer.Now connectivity is done.
Next POWER OFF your world-in-box.
and run file Arioner and click Open button on top right corner and browse that auc file.
Next you select COM 1 (If you've connected cable with COM 1 other wise select COM2 because there are only 2 physical com ports available in computer) and click "Send Program to IRD".
Status will show "Waiting for responce".
Now Power ON your world-in-box.
Copying process will start.Dont power off when it is in progress.
When it completes process it will show "Waiting for terminate signal" wait for a moment and then you will get a confirmation popup message of successfully uploaded.
Now You click OK button and Arioner program will exit.
Power Off you world-in-box and power On again it will load new software.
Now you can confirm that new software is uploaded from Information menu in your world-in-box it will show Software version like S841EC_$STK_A4454_20040826
Polsat will work after upgradation.Dont worry.
Thats it...