banjo2
Regular Member
- Joined
- Jan 31, 2004
- Messages
- 21
- Reaction score
- 0
- Points
- 0
- Age
- 82
- My Location
- ABERCARN SOUTH WALES
Please help. I am a complete newbie who has taken the plunge into digital. I have just bought a Technomate TM-5500 DAPCI receiver.
I tuned the receiver to Astra 19 degrees East and immediatly received good quality digital pictures with a strong signal.
I then tuned the analogue channels (to Astra 19 degrees East ) but signal strength only 2, quality 3 ,with the result no pictures.
I checked the loop through which seems ok. I am wondering is there any further settings I should make?
I am using a Triax 1.1 mt dish with a 3.0db universal LNB.
Until recently I have been using an old Grundig analogue receiver with good results with the same dish setup.
Any advice would be much apprciated. Banjo2
I tuned the receiver to Astra 19 degrees East and immediatly received good quality digital pictures with a strong signal.
I then tuned the analogue channels (to Astra 19 degrees East ) but signal strength only 2, quality 3 ,with the result no pictures.
I checked the loop through which seems ok. I am wondering is there any further settings I should make?
I am using a Triax 1.1 mt dish with a 3.0db universal LNB.
Until recently I have been using an old Grundig analogue receiver with good results with the same dish setup.
Any advice would be much apprciated. Banjo2