Testing New White Sky UK Card - CAID 963

[father ted]

am having a small freeze every 2 mins and not sure if my newcs is the right one i think it mitye be 1.65 will this have a bearing on my white card?can someone look at the file for me and see where and if am going wrong with it please im using a nabilosta max var image for the 500 s ive read that the ccam 2.1.1 and 1.66 newcs file are available form their site but when i go into add ons i can only see the ccam 2.1.1 and the newcs 1.65

 

[B16MCC]

Ok mate, that's my config I posted , it does work, however I notice you have your blocks set differently for top slot and bottom slot, make sure al 3 blocks are set to yes. I notice you're on a 500 so I think you're using parameters for top slot, sci1. Please someone correct me if I got that the wrong way round.

Also look in the blue/green/yellow panel (image dependent) to see what versions of NewCS / CCcam you are running. You need NewCS 1.66.

1.65 will cause problems.

 

[father ted]

Ok mate, that's my config I posted , it does work, however I notice you have your blocks set differently for top slot and bottom slot, make sure al 3 blocks are set to yes. I notice you're on a 500 so I think you're using parameters for top slot, sci1. Please someone correct me if I got that the wrong way round.

Also look in the blue/green/yellow panel (image dependent) to see what versions of NewCS / CCcam you are running. You need NewCS 1.66.

1.65 will cause problems.

your so right i must have copied your file ,but your right in what youve been saying too ,also i just checked and it looks like its newcs 1.65 ,i cant seem to find 1.66 on nabilosta its stil only showing the two cccam 2.11 and newcs 1.65 as an all in one package if i find it and install it can i copy what i have done so far to the file and set my blocks to yes as you have done on yours will this work?

 

[B16MCC]

should do mate.

NewCS 1.66 / CCcam 2.1.1 is on the Cams list when viewed from my DM8000. Not sure if nabilo's addons panel differs from box to box or maybe different for E1 and E2. Deepdiver will tell you that.

 

[sonic1]

Both are on the board under Nabilosat emu package

 

[darrenob]

ok on nabilo download from the yellow panel (yellow x2) and instal newcs 1.66 + CCcam 2.1.1

on nabilo on DM500 and DM600 the config file posted above is no the same
it won't work as its for DM800 E2 image not an E1

first get your box id there so much info on this around using hex converter
second the LOWER card is the one we are after not the UPPER

this is what a working newcs from a DM500 looks like

<?xml version="1.0"?>


<newCSconfig>

<readers name="SCI">
<device>
<name>Lower</name>
<type>sci</type>
<mhz>357</mhz>
<node>/dev/sci0</node>
<export>No</export>
<enabled>Yes</enabled>
<blocksa>Yes</blocksa>
<blockua>Yes</blockua>
<blockga>Yes</blockga>
<boxkey>yours in here</boxkey>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>10000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>No</Seca-PPV>
<pincode>0000</pincode>
<protectedsid>

</protectedsid>
<sid>
</sid>
<priority>round</priority>
</device>
<device>
<name>Upper Cardreader</name>
<type>sci</type>
<mhz>357</mhz>
<node>/dev/sci1</node>
<export>No</export>
<enabled>Yes</enabled>
<blocksa>Yes</blocksa>
<blockua>Yes</blockua>
<blockga>Yes</blockga>
<boxkey>yours in here</boxkey>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>10001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>No</Seca-PPV>
<pincode>0000</pincode>


<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>2</emm>
<ecm>3</ecm>
</cache>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>3001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>Nabilo</name>
<password>NabiloPWD</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
</user>
<user>
<name>DM600</name>
<password>DM600</password>
<port>10000</port>
<au>off</au>
</user>
<user>
<name>testing</name>
<password>John</password>
<port>10000</port>
<au>off</au>
</user>
<user>
<name>test</name>
<password>test</password>
<port>10000</port>
<au>off</au>
</user>
</newcamdserver>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>admin</name>
<password>admin</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
</newCSconfig>






this works as im using this .

 

[viewtop1]

Ok I got the white card working in one of my DM600's
Will try to do the same on DM800.

So this is what I did.

Put the Blue Card in my DM800 and did the CCcam -d and retrieved the Boxkey, but I could also simply have used the Box Key Converter.

Loaded a fresh Pli jade on my DM600 and downloaded and installed NEWCS1.66 + CCcam211.

Edited NEWCS.XML and added N: line to CCcam.Cfg

Checked the Softcam Panel Set NEWCS as Cardserver and checked the Cardinfo. NewCS showed entitlements and non premium channels cleared.

Back To NewCS.xml
and added the Correct Boxkey and set blocks to yes.
<mhz>357</mhz>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>Yes</blocksa>
<blockua>Yes</blockua>
<blockga>Yes</blockga>
<boxkey>########</boxkey>

Also set <au>off</au>

And disabled

Added a N: Line to Cccam.cfg and it reboot

It worked, all channels cleared

Funny thing though.

CCcam -d on the DM600 does not return a boxkey... but anyway as stated before I could simply have used the boxkey converter

No I want to figure out why the DM800 won't do the same even though I have done the exact same thing. Not urgent though as I now simply use the 600 as the cardreader for my DM800

 

[father ted]

should do mate.

NewCS 1.66 / CCcam 2.1.1 is on the Cams list when viewed from my DM8000. Not sure if nabilo's addons panel differs from box to box or maybe different for E1 and E2. Deepdiver will tell you that.

Both are on the board under Nabilosat emu package

yep thansk to you both have installed the newcs 1.66 and changed all the blocks to yes,then input my ip of box lol now i cant get it to work ,am sure i need to change n line in the cccam file but cant remember let me try to find it and see what i need to do

 

[B16MCC]

Glad you got it working mate. Bare in mind this method is not yet proven 100% working. Its thought the card will not update, due to the EMM blocks, you'll have to put it in the sly box every month or so. Wait for uvadi to retort with the next release of CCcam and see what that brings.

 

[sonic1]

Glad you got it working mate. Bare in mind this method is not yet proven 100% working. Its thought the card will not update, due to the EMM blocks, you'll have to put it in the sly box every month or so. Wait for uvadi to retort with the next release of CCcam and see what that brings.

You been drinking more than me, he ain't got it working
Post your xml F ted

And also start CCcam via telnet -s and the Newcs and see if that helps

 

[B16MCC]

lol, yeah must have mate.

 

[father ted]

ok guys this is much appreciated thsi is a copy of my newcs file i have installed on my box could you look it over and see if you can spot anything was up till about 030 this morning and not sure if its right ,i have put my boxkeys in but as you will see i have * them out also at the top of page i have said where i put my ip of box

N: localhost 10001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 this is what i have in my cccam file and only this is this right?

 

[sonic1]

N line needs to be like this assuming you use the lower card slot

N: 192.168.*.* 10001 Nabilo NabiloPWD 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Replace the * with your box ip and also where you see the Nabilo user and pass change au from on to off

Test and let us know how it goes

 

[father ted]

N line needs to be like this assuming you use the lower card slot

N: 192.168.*.* 10001 Nabilo NabiloPWD 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Replace the * with your box ip and also where you see the Nabilo user and pass change au from on to off

Test and let us know how it goes

ok done as you said replaced those things but still the same nothing

 

[B16MCC]

If you've still no joy then I suggest you simply use the examples I posted in post 36 of this thread.

All you have to change is the IP address of your box at the top of the newcs.xml then add the entry to your CCcam config depending which reader you are using.

Also, as I said break down your testing. Are you using the NewCS web interface ? If so can you see the card ?
Are you using CCcamphpinfo ? If so, is it showing your NewCS server online ?

 

[father ted]

If you've still no joy then I suggest you simply use the examples I posted in post 36 of this thread.

All you have to change is the IP address of your box at the top of the newcs.xml then add the entry to your CCcam config depending which reader you are using.

Also, as I said break down your testing. Are you using the NewCS web interface ? If so can you see the card ?
Are you using CCcamphpinfo ? If so, is it showing your NewCS server online ?

ok ive followed your instructions and got it working i changed a few things nothing serious but its going just need to know where i put share lines in for my duaghter do they still go into cccam file ?

 

[B16MCC]

Well, you have a choice.

1. You can add an F line for your daughter to CCCam. However, your daughters box will see the sly card at 2 hops, but to be honest it should be fine.
2. You can add users directly to NewCS using the web interface and then put an N line in your daughters config.

It really doesn't matter in this case. I would go for F and C lines in CCcam. Leave your newcs alone...

 

[GMAN6]

Does this mean i can leave all my peers with the c:lines i gave them or will i have to send them new N:lines once i start using newcs?

Well, you have a choice.

1. You can add an F line for your daughter to CCCam. However, your daughters box will see the sly card at 2 hops, but to be honest it should be fine.
2. You can add users directly to NewCS using the web interface and then put an N line in your daughters config.

It really doesn't matter in this case. I would go for F and C lines in CCcam. Leave your newcs alone...

 

[A nonymous]

You can do but they will see your local as hop 2 not hop1.

Some of your peers might not like that

 

[lakiluk]

Hello to all! 2 weeks ago my friend got the new white card and he put the card in original s** box. He create newcs.xml file put boxkey with boxkey converter (he has use serial from menu of the box) and with newcs he started the card. Card work ok. Few days ago he got one month free movie and sport channels but problem is that these channels work only in original s** box, newcs cant decode that channels. Can someone please help because he plan to buy movie and sport channels in near future. I heard rummor that when you put new card in original box you lost movie and sport channels but as i see on pictures in these tread newcs read sky sport even after card was pull out from original box. Thanks and best regards from Serbia!;)