satworld98
Member
- Joined
- Apr 7, 2006
- Messages
- 25
- Reaction score
- 0
- Points
- 0
- Age
- 38
- My Satellite Setup
-
Receiver:Mvision & Openbox.
Dish: Gibertini 85CM
Satellites:28E, 19E, and 13E. Motorised Gibertini 1M
- My Location
- Luton
I got an installer to install a motorised system for me. Needless to say he has made a total mess of it. It seems I can point the dish to hotbird (at least I can scan channels when I point to hotbird but not when I point to other satellites – I think it is not aligned properly) but not to other satellites. Can anybody advice me why this is the case. Also, I want to enter my longitude and latitude into the USALs settings. My details are:
Lat: 51:52:31N (51.87516)
Lon: 0:25:39W (-0.42738)
Which one do I enter, is it the 51:52 or the 51.875. It is an Mvison receiver and the motor is a Moteck SG2100A.
Lastly, for Mvison users, I can’t seem to be able to enter 51.87 on the latitude settings. I can only enter 51.8 and I can’t enter .42738 on the longitude settings I can only enter 0.4. Any ideas?
Thanks in advance for the advice.
Lat: 51:52:31N (51.87516)
Lon: 0:25:39W (-0.42738)
Which one do I enter, is it the 51:52 or the 51.875. It is an Mvison receiver and the motor is a Moteck SG2100A.
Lastly, for Mvison users, I can’t seem to be able to enter 51.87 on the latitude settings. I can only enter 51.8 and I can’t enter .42738 on the longitude settings I can only enter 0.4. Any ideas?
Thanks in advance for the advice.