Warning!!! Coship 2300 patch

[jzurd0]

To bacher, i think that soft can only decode irdeto 1 nagra 1 and so on, but try, when did you buy the deco?.

 

[jzurd0]

***AXIL AD600 I DIDN´T EXPLAINED MYSELF**
I mean,after flashing whit the Astrovox "distorting" bin you have to cut the cable and cross the 2 cables inside the main RCA video cable,usually one red and one white,change GND to SIGNAL and SIGNAL to GND,do you know what i mean?

I don´t know if you know about electronics,please tell me the experience,this worked for the coship 5300.

http://www.astrovox.biz/Data/DownloadData/software for Microx WMD -4000 dt 20.7.zip

 

[bacher]

I bought my receiver four months ago it was patched with the software version : s02b-2.96R-b34.02 it was Ok with TPS and ABsat i changed the keys for tps three times from OC to OE , if the new software version do not support sec@2 i don't think it is interesting because we can not have s*k* or d+ and i noticed that the boot 34.02 is not the same because there is also the boot b34.01

 

[jzurd0]

The crossing cable works!

But,whit that firmwares what do we get?, i´m testing now...

 

[jzurd0]

Testing Topsat Bin, waiting for anyone to test Astrovox bin.

 

[rehbadreddine]

I have coship2030S pci dvb card , so about which coship product you speak ? DEMODULATOR OR PCI CARD SAT ?
please help to find a site or SOFT about coship 2030S.

 

[steffan_st]

Still active here Thanos? If you are what kind of software are you using for making patches?

Cheers

 

[steffan_st]

To Legrandchauve,Oxoid and the other guys using the "old" coship 2300a.Which emulator are you using right now?I'm still using the srt-3600 18jan.

 

[ck32]

hi
I aso have an old coship (old soft and firm) and use the truman 900 firmware which works fine with tps !(only interested in tps !)
bye
you can found it in sergiosat yahoo group :

http://login.yahoo.com/config/login...tp://cf.groups.yahoo.com/group/sergiosat/join

 

[poilus]

hello jzurd0, good work...for the cable
can you be more clear with the cross cable

for exemple, :

in the same connector: cut cable to pin 1, cut cable to pin 4
and join the cable wich come from pin 1 to the cable wich come to pin 4...
because colors are not always the same .

thxs

 

[poilus]

ok sorry
rca cable..not scart !!! i'm stupid
ok now,video is acceptable.. but audio is crashing white noise.
so the video signal is revert, i've got verified with an osciloscope.
the video ground is the exterior of the axil rca, in this way to have video, perturb the audio channel ground because we put the axil video signal to tv ground pin, and the axil video ground to the enter video pin.
the the only way to have at this moment video and bad sound is to just put the middle pin af the rca under the axil, the exterior (mass) must do not touch the axil connector.

if someone could find better !!!

did someone has a good sound ?

 

[jzurd0]

Poilus, use the RCA out,it seems you are using SCART,i´m testing SCART pinouts.
You only have to cut the rca cable from video out and cross the two cables you find inside.

By the way, the audio cannot be connected to the TV you´ll have to use an AMP or a computer speakers,i´m solving that.

When all this stuff be clear i´ll make an illustrated doc.


Cheers!

 

[jzurd0]

You´ve been faster O-Ha

 

[jzurd0]

Poilus, let me know if you fix the audio thing.

The main problem for that is using the VCR...,i´m going with a set of computer speakers and perfect sound.

The point is that the ground of the audio out cannot touch the video as you said,try to get an external ground.

Have to go now.

See you!

 

[poilus]

actually with crossing signal/gnd, onca, we put the signal on the tv audio ground (with scart/rca adapter)
agree with me ?

 

[jzurd0]

By the way what firm are you using,and what are you getting?

I´m on Astra 19.2E

 

[jzurd0]

I connect the audio to an external device,not to the TV.
That you are saying in previous post is it a fix?.

 

[poilus]

i'm on hotbird (i do not think it's the problem or have an inscidence)
using topsat

so
ok
i've done test this afternoon and this i s what i found
on the axil, audio and video have the same ground.
i'm using on tv an scart/rca adaptor (from a playstation psx)
i've cross the two cables of the video rca,
so if audio rca are connected , the video cut off and sound is good
the only way i found is to not put entierly the rca audio just the middle
do you have make audio connection on an axil ?
what do you use for connecting tv to the axil?
it seems on french forum, they've got the same problem and solution

http://www.decodesat.biz/decode/viewtopic.php?t=17875&start=0&sid=7bc6a895dd6b2331d522b6f67d5576f7
which says :
enleve le fil de masse des 2 audio + inverse la masse et le fil jaune de la video

thanks

 

[jzurd0]

I use the cable wich came with the decoder , a 3 RCA, (2 audio 1 video).
I connect the audio to computer speakers, and the crossed video signal to the TV.

 

[poilus]

ok
i prefer it, connect audio to your tv,to see
in your case, audio & video have different ground...

what's your firmware please ?