Warning!!! Coship 2300 patch

[jzurd0]

That´s the point,the ground.

The same firmware.

Well,except for this little problem i´m very happy with the update,the firm works fast and fine.

 

[poilus]

so do you have a perfect video signal on tv ? mine is a litlle perturbate
thanks

 

[jzurd0]

In the french forum.
I think they are talking about joining the gnd of the audio outs, crossing the video signal and putting into the tv,but i tried it and don´t work for me.

 

[jzurd0]

Joining the audio gnd works, as jpb2000 said in the french forum,you loose stereo,but the sound is ok.
The image is good,not perfect but enough.

 

[jzurd0]

Poilus, have you solved the audio thing?
How is it going?.

 

[poilus]

the problem with the video is that to solve the reverse signal, we reverse polarity
which disturb so the audio polarity because the gnd video (on tv) becomes the audio mass reference based on video signal.
for audio...do not work,in french forum, they do not use the audio ground to solve the problem, noise is very bad.
i'll see if i can make an video correcor amp.
that's enougn now...it's not the good way to proceed.because, when the author of firmware will do the correction of his firm, we must un_solder the video cable !!!
i 'll tell you of my news soon...

thanks jzurd0

 

[poilus]

hello
the vidéo parameters comes from a software configuration, in the firmware
the best solution is to contact the firmware creator to remove the video reverse feature.

what do you think about ?

thxs

 

[milaya]

Hello!

I have turn out a special receiver which autoupgrades Agila Dream TV/Astro/Zee TV,do you wanna?please kindly advise.

Thanks and best regards
Morgan

 

[milaya]

Hello!

I have turn out a special receiver which can autoupgrades Agila Dream TV,Astro,Zee TV...

I believe you are interested in it,please feel free to contact me


Morgan

 

[jzurd0]

Poilus that would be ok,but i´m not sure if firmware dealer will answer us...
I´m still waiting for axil.es to be online...

 

[iron2000]

can somebody tell me rs 232 connection for micro-x wmd 4000 fta

 

[steffan_st]

probably like this:
2-3
3-2
5-5

can somebody tell me rs 232 connection for micro-x wmd 4000 fta

 

[poilus]

milaya vbmenu_register("postmenu_136305", true);
can tou tell where comes from the firmware you say.

jzurd0,
i do not think axil will answer us (i've send a mail 2 weeks ago).
i've the sti processor datasheet and i will looking if the video signal is inverting in the chip or by an external component, if it's inside the chip the only solution is to make an external video inverter (which is currently in elaboration) if the signal is inverting outside, it will be more easy to use a solder pan and pick up signal where he is normal.

i'll do test today,

 

[poilus]

jzurd0,
BINGO... that's rignt now, we musy take directly the video via a 10uF capacitor ,on the pin 34 of cvbs video output of the sti5518.
but the level is a bit small and it is necessary to increase contrast on tv.
so this this audio good on rca,
rca ground connected but the signal take to the sti sold on the "middle" of rca cable.
the next stage is to make a little video amp to make signal stronger.


nice no ?
give me a mail to send more info

 

[jzurd0]

Poilus:

http://crypto.ws/upload/index.php?action=downloadfile&filename=srt3680_dsr5002_5003.zip

No more cable crossing...

 

[jzurd0]

Seka2 is near...

 

[poilus]

great...but what is the menu key code to enter in it.
thxs.

 

[poilus]

because it seems the link you give before do not accept 6969 & 8282 !

 

[jzurd0]

6969 x2 seeing a channel,NOT in menu,then 8282

Great software...,the best i tried.
High quality video. RGB enabled again.

 

[jzurd0]

I mean, go to 6969 "channel",a popup password window will come and you have to enter 6969 again. Then go to 8282 channel.

That´s it!