twag42
Regular Member
- Joined
- Jul 6, 2004
- Messages
- 418
- Reaction score
- 0
- Points
- 16
- Age
- 61
- My Location
- Amsterdam,Holland
i would also think that hotbird 13e is the 0 position. so with everything dish,motor all in a straight line with the motor set at 0 and the dish properly centered,loosen the tightening bolts on the motor and move the lot till you pick up the signal on hotbird.then tighten the bolts that you just un-loosened.CONGRATULATIONS!! your dish is now set :-) with the right dish elevation you should have no problem picking up the rest of the satellites.
TWAG
TWAG