Just Sharing This New multi-stream @ 30 west

william-1

Super Moderator
Staff member
Joined
Jul 2, 2005
Messages
12,179
Reaction score
12,266
Points
113
Location
Epping Forest
My Satellite Setup
OP Gibertini 100 XP+ Inverto Black Ultra Lnb
Superior Dark Motor (160° max)
(50 east to 45 west)
Octagon SX88+Optima (A/B switch) Edision primo IP S2

Raven 88cm Mesh Dish + IBU Twin output
Stab100 H to H (120° max)
(53 east to 45 west)
Octagon SX88+ Ultra HD (A/B switch) Golden Interstar Alpha_X
My Location
Epping Forest Essex
Hispasat 30W-5 @ 30 west
11330 H 9140 3/4 DVB-S2/8PSK
MPEG-2
MPEG-4
PLS: Gold
53850 TDT Aragón 8916-1001
Europe
new
Aragón TV w F 101 103 Spa
104 Spa 10160
Aragón HD w F 32 33 Spa
34 Spa 10162
MPEG-4/HD
-R- Aragón Radio Zaragoza 1003 Spa 10161
-R- Aragón Radio Huesca w 4003 Spa 10165
-R- Aragón Radio Teruel w 5003 Spa 10166

SX-88+ before you begin an autoscan remove all data & Albertis DTT transponders,
Manually add new transponder then Search>> Auto>> Multi Stream On>>FTA only On>>TV then press OK.
 

MCelliotG

Specialist Contributor
Joined
May 10, 2015
Messages
1,012
Reaction score
1,199
Points
113
My Satellite Setup
TBS 5925, Mut@nt HD51, EDISION OSMINI, MABO 130X144, DRAGONSAT DS3000 LED MOTOR, INVERTO BLACK ULTRA TWIN LNB
My Location
Thessaloniki, Greece
Found easily with the Availink tuner of OSmio4K.
mis30.jpg
Also, working fine on Silabs tuners (no freezing) with manual input!
 

satesco

Specialist Contributor
Joined
Aug 10, 2008
Messages
1,894
Reaction score
2,650
Points
113
My Satellite Setup
seven antennas,one toroidal with 16 lnbs,
6 satellite receivers,2 Meters,9 PC cards(tbs6983,6903,6590,6504,6522,6209,2603,6909X,6903X,6902se,skystar hd2),2 tuners usb-tbs5927 & tbs5925,Skystar HD.
Satellite reception between 100.5E-50.0W
My Location
Romania

Attachments

  • 11329 H,9141,34,8psk-Aragones_2019-07-01_20-39-54.jpg
    11329 H,9141,34,8psk-Aragones_2019-07-01_20-39-54.jpg
    77.8 KB · Views: 33

maxi_power

Member
Joined
Jan 5, 2015
Messages
95
Reaction score
40
Points
18
My Satellite Setup
120cm motorised dishes
My Location
PT
Works fine on Octagon SF8008.
Thanks...

125271
 
Last edited:

Adam792

Specialist Contributor
Joined
Sep 5, 2009
Messages
1,260
Reaction score
1,152
Points
113
Age
31
My Satellite Setup
Dishes: 80cm (5°W), 80cm (30°W), 60cm Zone 2 (13°E/19.2°E/28.2°E)
Receivers: HTPC w/ TBS6905 4x DVB-S2 PCIe tuner card running TVHeadend, Octagon SF8008 mini.
My Location
Cheltenham
Not a sausage from this on my 80cm dish. I’m guessing it’s at a lower power than the adjacent 11347H and 11302H transponders which come in fine.

Or my configuration is struggling with the PLS/no multistream combo which seems unlikely.
 

Stevenvc19

Member
Joined
Jul 31, 2018
Messages
308
Reaction score
162
Points
43
Age
28
My Satellite Setup
3x Edision Primo S2:
30W
5W
0.8W
4.3E
9E
13E
19.2E
28.2E
My Location
Willebroek Belgium
Nothing on my Edision PRIMO here in Belgium (Mechelen -Antwerp) with my triax 110.
But also no TV Castilla la mancha on 11491 V 7522 MST
And also no TPA 7, 8 nor Teledeporte on 11496 H 7884
Signal too weak, I guess?...

Have to say, since BOM TV Changed into BOM Cinema, When switching to that channel, my receiver gives me no signal on the transponder. After 5 - 10 -15 seconds, -sometimes- it gives me 84% of signal quality and starts receiving BOM... Even when trying to rescan the transponder, I can't get any signal...
 

pontiend

Contibruter
Joined
Dec 12, 2007
Messages
2,992
Reaction score
3,496
Points
113
Age
80
Location
South Yorkshire
My Satellite Setup
See Signature
My Location
south yorkshire
Still coming in fine here.92% quality.
TBS6983 105cm Dish
30w 2.jpg
 

Adam792

Specialist Contributor
Joined
Sep 5, 2009
Messages
1,260
Reaction score
1,152
Points
113
Age
31
My Satellite Setup
Dishes: 80cm (5°W), 80cm (30°W), 60cm Zone 2 (13°E/19.2°E/28.2°E)
Receivers: HTPC w/ TBS6905 4x DVB-S2 PCIe tuner card running TVHeadend, Octagon SF8008 mini.
My Location
Cheltenham
Nothing on my Edision PRIMO here in Belgium (Mechelen -Antwerp) with my triax 110.
But also no TV Castilla la mancha on 11491 V 7522 MST
And also no TPA 7, 8 nor Teledeporte on 11496 H 7884
Signal too weak, I guess?...

Have to say, since BOM TV Changed into BOM Cinema, When switching to that channel, my receiver gives me no signal on the transponder. After 5 - 10 -15 seconds, -sometimes- it gives me 84% of signal quality and starts receiving BOM... Even when trying to rescan the transponder, I can't get any signal...

Unfortunately it won’t work on the Edision as it has a new PLS code which wouldn’t be in the Edision’s memory I don’t think. I’m pretty sure the firmware just comes pre-loaded with known PLS codes.

Still coming in fine here.92% quality.
TBS6983 105cm Dish
View attachment 125287

Hmm that seems pretty strong then for me to not be getting a sniff on an 80cm. How do the weak CMT TV and A7 11491/11496 ones compare for you?
 

Adam792

Specialist Contributor
Joined
Sep 5, 2009
Messages
1,260
Reaction score
1,152
Points
113
Age
31
My Satellite Setup
Dishes: 80cm (5°W), 80cm (30°W), 60cm Zone 2 (13°E/19.2°E/28.2°E)
Receivers: HTPC w/ TBS6905 4x DVB-S2 PCIe tuner card running TVHeadend, Octagon SF8008 mini.
My Location
Cheltenham
Scrub that! Getting it now with 10.7dB C/N (so just marginally weaker than 11347H).

It seems for some reason that TVHeadend in Linux ignores the PLS settings unless an Input stream ID (ISI) is set - even though there isn't one with it not being multistream. Setting it to '1' seems to do the trick to lock the signal anyway though.
 

LeBelge

Member
Joined
May 14, 2015
Messages
290
Reaction score
149
Points
43
My Satellite Setup
2x Triax TD 110, 2x Edision OS Mio 4K (plus), Edision OS Mini 4K, Edision OS Nino Pro
My Location
Belguim
Works on my Edision PRIMO with 60 cm dish
 

Stevenvc19

Member
Joined
Jul 31, 2018
Messages
308
Reaction score
162
Points
43
Age
28
My Satellite Setup
3x Edision Primo S2:
30W
5W
0.8W
4.3E
9E
13E
19.2E
28.2E
My Location
Willebroek Belgium
Works on my Edision PRIMO with 60 cm dish
How did you do that?

I can’t Get any signal On my PRIMO with a 100cm Dish!
 

Adam792

Specialist Contributor
Joined
Sep 5, 2009
Messages
1,260
Reaction score
1,152
Points
113
Age
31
My Satellite Setup
Dishes: 80cm (5°W), 80cm (30°W), 60cm Zone 2 (13°E/19.2°E/28.2°E)
Receivers: HTPC w/ TBS6905 4x DVB-S2 PCIe tuner card running TVHeadend, Octagon SF8008 mini.
My Location
Cheltenham
I can't get this any more either. No sign of it on my 80cm dish.
 

pontiend

Contibruter
Joined
Dec 12, 2007
Messages
2,992
Reaction score
3,496
Points
113
Age
80
Location
South Yorkshire
My Satellite Setup
See Signature
My Location
south yorkshire
It seems to have gone missing here too.No signal.
TBS6983 105 cm Dish
 

LeBelge

Member
Joined
May 14, 2015
Messages
290
Reaction score
149
Points
43
My Satellite Setup
2x Triax TD 110, 2x Edision OS Mio 4K (plus), Edision OS Mini 4K, Edision OS Nino Pro
My Location
Belguim

Lazarus

Retired Moderator
Joined
May 29, 2009
Messages
27,078
Reaction score
8,664
Points
113
My Satellite Setup
80cm Motorised.
Several small Dishes.
Much else.
My Location
North York Moors
Yep. Having previously failed to get Aragon/AragonHD on my Edision Primo, I now do, thanks to the simple expedient, illustrated above, of toggling MTS to Off.

Good signal on 80cm dish.
 

jeallen01

Specialist Contributor
Joined
Oct 12, 2003
Messages
6,674
Reaction score
2,630
Points
113
My Satellite Setup
See Signature
My Location
Somewhere in England (possibly?)!
Yep. Having previously failed to get Aragon/AragonHD on my Edision Primo, I now do, thanks to the simple expedient, illustrated above, of toggling MTS to Off.

Good signal on 80cm dish.
Ditto on the SX88+ on an off-set LNB on one of the Zone 2 dishes (although I did the actual search using the Gibby): interestingly there was Zero SQ showing on the display before it it started to search that transponder frequency - it then sat there "searching" the transponder for nearly a minute before the 2 channels "popped up" and the SQ came right up (aboout 60% on the Zone 2 & 100% on the Gibby - can switch between the fixed and steerable dishes at a press of the button on the RF remote to control the antenna relay just behind the Rx - works great :D).

Also noted (rather weirdly?) that the SS doesn't change much at all from about 70% when I switch between the 1.2m Gibby and the off-set LNB on the Zone 2 dish - I would have thought that it would change quite a lot.
 
Last edited:

jeallen01

Specialist Contributor
Joined
Oct 12, 2003
Messages
6,674
Reaction score
2,630
Points
113
My Satellite Setup
See Signature
My Location
Somewhere in England (possibly?)!
Still no luck for me.
Can't get any signal. Like the transponder isn't active.
Might be due to the firmware? I am using the modified .62 firmware...
Try searching the transponder, regardless of whether there is any sign of a signal - and I suspect the receiver might need to be connected to the internet in order for it to "go find" the transponder/channel parameters (that seems to be the way the SX88+ does it, and I have read comments to that effect)
 

Lazarus

Retired Moderator
Joined
May 29, 2009
Messages
27,078
Reaction score
8,664
Points
113
My Satellite Setup
80cm Motorised.
Several small Dishes.
Much else.
My Location
North York Moors
Ditto on the SX88+ on an off-set LNB on one of the Zone 2 dishes (although I did the actual search using the Gibby): interestingly there was Zero SQ showing on the display before it it started to search that transponder frequency - it then sat there "searching" the transponder for nearly a minute before the 2 channels ......

Ditto.
 

Lazarus

Retired Moderator
Joined
May 29, 2009
Messages
27,078
Reaction score
8,664
Points
113
My Satellite Setup
80cm Motorised.
Several small Dishes.
Much else.
My Location
North York Moors
Still no luck for me.
Can't get any signal. Like the transponder isn't active.
Might be due to the firmware? I am using the modified .62 firmware...


As per JE's advice, scan anyway - and be patient. The whole exercise is counter-intuitive.

PS I'm also using modified .62
 
Top