1.5 Precision dish install

moonbase said:
What happened to it, it looks a very nice dish?

Just a quick question about your Precision 1.5m dish, could you please explain the reason for removing the paint, is it something to do with straightening the dish or was the paintwork just in poor condition?
Click to expand...

It wasn't my dish Dave :(nice dish though and would be nice for Evan, but its findings one,

My main reason, ive seen aluminium corrode in the past mainly were something joins to it, in this case the lnb arms and the rivets holding back plate, I wanted to check the condition, I was painting the dish to blend in anyhow, its only a hour or so work extra stripping it and I will fill any imperfections before painting,

This is a lovely dish and ive fell in love with it, I want to install it with piece of mind it will still be in good shape in another 20yrs time and hope I am still around to enjoy it, reading up a little channel master took over the production for a while.
 
martin-f said:
It wasn't my dish Dave :(nice dish though and would be nice for Evan, but its findings one,

My main reason, ive seen aluminium corrode in the past mainly were something joins to it, in this case the lnb arms and the rivets holding back plate, I wanted to check the condition, I was painting the dish to blend in anyhow, its only a hour or so work extra stripping it and I will fill any imperfections before painting,

This is a lovely dish and ive fell in love with it, I want to install it with piece of mind it will still be in good shape in another 20yrs time and hope I am still around to enjoy it, reading up a little channel master took over the production for a while.
Click to expand...

Precision Antennas seem to have had a few evolutions over the years, firstly the take over by Channel Master, then the management buy out to QP and now to Elite Antennas. Its just my personal opinion but these are the best satellite dishes you can get, nothing comes close.
 
I was fortunate to visit their factory in Shakespeare's country (actually Anne Hathaway's) sometime in the early 90's. Spinning machines and broomsticks to get the reflectors into shape.

Masons Road
Stratford Upon Avon
Warwickshire Cv37 9Nu
Warwickshire
CV37 9NU
 
Channel Hopper said:
I was fortunate to visit their factory in Shakespeare's country (actually Anne Hathaway's) sometime in the early 90's. Spinning machines and broomsticks to get the reflectors into shape.

Masons Road
Stratford Upon Avon
Warwickshire Cv37 9Nu
Warwickshire
CV37 9NU
Click to expand...

It still has the original tag on it S, I've been trying to find references to the serial numbers but no luck, the chap said he installed it over 10 yrs ago, he was going round the country installing them for data, maybe the 03 is 2003 ?
dscn9942-small-jpg.83670
 
Ok I have the dish back in good shape, just need to string it then test it with mirror's, a closer inspection of the holes that hold the lnb arms they need a little work. I will weld new aluminium washers in place on low heat to prevent distortion, hopefully get it primed and back on its stand later today ready for the mirrors arriving hopefully tomorrow :), still a bit of paint stripping left to do.
DSCN9986.webp DSCN9987.webp DSCN9988.webp DSCN9990.webp
 
martin-f said:
he was going round the country installing them for data, maybe the 03 is 2003 ?
Click to expand...

The phone code (0789) predates April 2001 when they added a 1 if that helps...
 
So ..What happened to the 2.2 PF Martin ?
 
martin-f said:
It wasn't my dish Dave :(nice dish though and would be nice for Evan, but its findings one,
Click to expand...

Vipersan said:
So ..What happened to the 2.2 PF Martin ?
Click to expand...

It wasn't mine pal:(, what I have now are my biggest ever dishes,

Ok all the paint striped apart from the outer rim, just a dent to fill and a scratch and rub down and I will primer her up:). I will remove the paint from the rim while the filler is going off.
DSCN0003.webp DSCN0004.webp DSCN9998.webp
 
martin-f said:
It still has the original tag on it S, I've been trying to find references to the serial numbers but no luck, the chap said he installed it over 10 yrs ago, he was going round the country installing them for data, maybe the 03 is 2003 ?
dscn9942-small-jpg.83670
Click to expand...
I'm certain to have an olde catlogue lying in the attic/shed, give me a couple of days.

From memory though
ES Earth station
15 is 1.5m
11 is Ku band
SP single polarity
T ?
 
Hi, nearly sorted, the scratch and dent filled rubbed down and primered, I need to get another tin of primer tomorrow to finish it, so far so good very pleased with this:).
DSCN0009.webp DSCN0010.webp DSCN0011.webp DSCN0012.webp DSCN0013.webp DSCN0015.webp DSCN0016.webp DSCN0017.webp
 
All this reshaping and refurbishing looks really impressive! I hope to have a big dish one day. :D

sonnetpete said:
The phone code (0789) predates April 2001 when they added a 1 if that helps...
Click to expand...

The 1 was added to phone codes in April 1995 (PhONEday). So even older potentially!
 
Adam792 said:
All this reshaping and refurbishing looks really impressive! I hope to have a big dish one day.
Click to expand...

Thank you, that's what I said about 7 years ago, it took me 5.5 years to get one then 1.5 years to install it lol, ive always admired peeps with big dishes and I know I would have one at some point,

My admiration has now moved to peeps like feedsat, I still want bigger so I am in the same boat as you at the end of the day;), if you want something that much if your like me you will get it :), I will look forward to your install as and when it happens good luck I hope its soon :).
 
Just checking the dish for roundness again and its looking good, I will string it tomorrow but looking at this it shouldn't be far out.
DSCN0017.webp
1-png.83583
 
martin-f said:
Question please, would I be right in saying lf I use C band on this antenna I use the normal flat scalar
View attachment 83820
Click to expand...
Absolutely yes ..
;)
This goes for any lnb ..
C/Ku/Ka

A conical feed would work ...inefficiently ...
poor dish illumination..
and lose valuable dbs
 
martin-f said:
Thanks Evan, what about the plate if I just install one C band lnb, do I have to install the plate manually as and when I want to use it, or can I get both pol leaving the plate in please?
Click to expand...
Yes you would buddy ..
The only way round this is 2 lnbs close to focus ..or maybe a corotor..

A problem that has plagued me for more years than I care to remember..

If memory serves ..there was a compromise solution in the form of a specially shaped waveguide extension that could be fitted on the end of your lnbf ...but not sure if they are still available ..and were damned expensive ..
Made by an Aussie company ..I think

(worked a bit like a septum feed ...but stepped internally..)
 
Back
Top