I have used it several times. Just use the web interface and the control/sat finder option. Before doing it, it is a good idea to note the frequency to check because the frequency is not set correctly in the sat finder (if you come from the zap function, the frequency of the tuned channel is...
I am not sure to understand what you mean. I have two decoders: an analog NOkia and the DM7000. The DM is connected to a dual lnb (Astra + Hotbird on a single cable) on a motorised Dish. This Dish is looking to Hotbird . I have done this way because my Nokia dish is using a proprietary protocol...
Thanks Haggard for your comment. I am a little lost because, I went on my roof to adjust the skew with my laptop (thanks WIFI) . I used the web satfinder which works quite strangely. First I Zapped to MV4 then I clicked on Control and Satfindinder. The strange thing is the frequency displayed...
HI All,
I have found a discrepancy for the frequency of Multivision 1-7 :
On lyngsat : http://www.lyngsat.com/packages/tps.html it is :
11662 Mhz polarisation V
tp 158 FEC 3/4
SR 27500
But in my DM, these channels are defined as
11661 Mhz polarisation V
FEC 3/4
SR 27502
As I have...
Hi td03-5,
Thanks for your answer. I don't think it is snow or ice because although I had some snow on the roof, now there is no more and the temperature is positive. However I will check as soon as possible (may be this WE). I'll let you know.
Happy new Year !
Thanks td03-5 !
I have to wait to make changes on my dual lnb (still snow on roof) I'll let you know if rotating the lnb is enough to get rid of the BER. The other solution is may be to get a bigger dish (currently 70cm).
Bye
LOL
:ny
Hi Haggard,
I am back from holidays, I have just seen your answer. I am sure you are right. I have installed a DM in the south of France for a motorised system without any trouble. All Mvs are clear and OK. Back at home, I have used the SatFind feature to check the BER of MV1-7 which are not ok...
Thanks a lot Haggard. It is strange that you have better snr for Mv1-7 than for Mv8 (compared to my snr)
As a remainer I have
For MV1-7 snr = 60%
For MV8 snr = 73%
For TPSs snr = 83%
I don't know if a skew ajustment would improve the situation.
For Mv1-7 , the decoding is not correct.Either...
Hi all,
I start a new thread as I think the depth is becoming too high!
---------------------------------------------------------------------
complete thread here
Hi all,
T*s is ok for me also with new mary. But I have troubles to get mvs. I have only 15% ok at the top, below it's totally...
Thanks both for your answers :)
I am in switzerland. The strange thing is the Snr depend on channels. I think they are not all on the same SAT. i have read that Hotbird uses different beams (large , europe , ...) . The stranger point is that mv8 is different from others Mvs.
Any explanation...
Thanks for your answer. I stop writing in yellow :P
I have made a rescan and consequently I have retrieved M8. I still don't have Mv1 -Mv2 ok
Mv8 is fine but I have a snr of 73% compared to 61% for the others.
For Mv1-Mv7 at best the image is blinking with very very bad sound.
For T*s...
Hi all,
T*s is ok for me also with new mary. But I have troubles to get mvs. I have only 15% ok at the top, below it's totally black and sound is not ok.
Could it be that my signal is too low. I have a SNR of 60% compared to 80% for t*s extrem.
Thanks for any feedback
)(-red
HI
Is NewcamD v5.25 descrambles also MV1 to MV7 ?
Currently I have all T*S clear with MV8 but MV1 to MV7 are still dark (with latest CAMD3 ).
Dream7000S + Hydra angharad 1.08 + latest control panel
Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.