Recent content by sassofonu

Thanks for all your replies, I saved your responses and will try them out the next time I need to change my receiver firmware. Regards

I was told to take the motor to zero using the 2 switches, switch off the receiver, and press both buttons then switch on again keeping them pressed down for 10-15 seconds...

The motor has these two holes http://www.phones-direct.ro/public/dream/dg-120.jpg

Thanks rolfw, the installer in fact had used Usals but inputed Lon 2.7E and Lat.41N, instead of 14.4E and 35.9E (my actual co-ords). Now when I input either coords in Usals it strays away from the satellite positions. is it possible to save the positions using the buttons on the motor rather...

Hi all, I have the above motor and when I send it to zero from the receiver it slews towards the East onto the 10degree mark on the motor axis. I bought the motor from Germany. Whatever longitude value I input it always goes to the same value on goto zero command. Anyone had the same problem...

Thanks a lot - so what's the use of the Key M1, X1.. ?

Hi all, I have an Edision 2100 set, would like to enter keys for D+ (Nagra 2), however the menu on my set for Nagra 2 give the following rows: Key 00, Key 01, Key M1, Key X1 and Autoroll (On/Off). However all keys I find for this package give the following entries: IDEEA key 86, IDEEA key 96...

Hi does anyone have an Edision 2100 FTA receiver? I am having some problems to set it up.. Basically after mounting everything, (pole vertical, dish aligned with rotator arm, angles etc.) I chose astra from the receiver menu on usals (having inputed lat long) and moved the whole thing around to...

Thanks - now I remember,, that would be the 2F point - In fact the distance seems roundabout right at 2 times the length of the lnb boom.

Hi I tried to speak in front of my satellite dish :-worship Eventually if you speak and move your head around you find a point where your voice gets amplified. Obviously that;s where the dish is reflecting and focusing back the sound waves. You would expect this point to be the place where...

Hi all, what do you think of the Smart MX 21 receiver? http://www.wela-electronic.de/en/produkt.php?option=produkt_anzeige&ID=493 I am considering installing my first satellite tv system ever and am going to buy this receiver at first then get a dreambox later on and put the MX21 on another...

Her name is not Becky but Gianna Michaels, famous pornstar...

Hi all I am getting a motor for my satellite installation would I be safe going for the Super Jack DG 120 or should I rather get the Stab H-H 100, for an 85cm dish? I would rather have a robust motor than a cheaper one to be replaced in a couple of years due to corrosion/wearing out of parts...

Yes but would it be possible for someone at home in central europe to receive a transmission from a satellite at 72 degrees west ?

NASA TV is carried by Satellite = AMC 6 Transponder = 17C 72 Degrees West So there is NO way someone in central europe can get a transmission from a satellite so far west as it would be very low on the horizon? thanks for the explanation. I wonder why NASA does not 'relay' in some way its...