roccky
Member
- Joined
- Nov 21, 2011
- Messages
- 110
- Reaction score
- 29
- Points
- 28
- Age
- 44
- My Satellite Setup
- Gibertini 125, 18'' actuator, vbox, tbs6922 & azbox
- My Location
- London
Hello,
It is being tricky to find a good alignment for my new gibertini 1.25 with polar mount and actuator.
At one point, the dish was finding good signal in 0,8W, in 28,2E, and also in 12,5W. But then signal in 24,5W was rather poor and no signal at all in 30W. My old traix 110 with motor stab was able to find decent signal at the same time in all those satellites, so there should be signal out there, hopefully improved by the gibertini. What do you think the problem could be? Maybe the lnb position is not suitable for satellites in the west side (I am using my old twin invacom lnb 0,3 d when you dish is set up for the East? or maybe since the dish is quite powerful, it found good signal in 0,8W and 28,2E without being really pointing in the exact right direction?
Thanks
It is being tricky to find a good alignment for my new gibertini 1.25 with polar mount and actuator.
At one point, the dish was finding good signal in 0,8W, in 28,2E, and also in 12,5W. But then signal in 24,5W was rather poor and no signal at all in 30W. My old traix 110 with motor stab was able to find decent signal at the same time in all those satellites, so there should be signal out there, hopefully improved by the gibertini. What do you think the problem could be? Maybe the lnb position is not suitable for satellites in the west side (I am using my old twin invacom lnb 0,3 d when you dish is set up for the East? or maybe since the dish is quite powerful, it found good signal in 0,8W and 28,2E without being really pointing in the exact right direction?
Thanks