Diablo Light Cam

[Mickha]

Hi slimsim,
the latest Stealth 215 now has D+ and Premiere AU.
If you want to keep Stealth 203 just update the Diablo keys.bin file or manually enter the last Premiere keys update.

 

[slimsim]

how can you keep upto date with key changes i was watching a film on tiq**la earlier in the day then went out when i came back it said scrambled or bad info and wont work again should i upgrade to 215 i dont know how this update thing works or even how to manually change keys

thanks

 

[tamagoch]

Hi! Slimsim

First ensure you have the latest Cas 3 software, 8.2.
Then download the Stealth file you wish to use and, after unzipping, or unraring, copy the Stealth215.dup file to your desktop, makes it easier to find.
Also download the latest Diablo keys.bin file and put that on your desktop.
Start up your Cas 3, and insert your Diablo Cam into the slot.
Click on Cam Module tab, top left, and the Diablo Cam icon, and again on the next Diablo Cam icon.
This brings up the Diablo page.
Click on Cam Disk Functions and Format.
When it has finished formatting click on the Upgrade Cam tab and the little icon, with 3 dots, to the right of File Name.
Navigate to your desktop and load the Stealth215.dup file, click open.
Now click on the Start Update icon, which now should have a green light.
Wait until this has finished.
Now click on Cam File Sytem tab, and click connect.
Click on the new keys.bin file, located in the bottom left screen, and the green arrow pointing right.
This will overwrite the old keys.bin file.
Now disconnect and put the cam in your receiver.
Navigate to the cam in your menu and ensure you have
Auto PMT ON
Emulators ON
and you should start opening channels.

 

[v9oly]

Hi slimsim,
Manually editing keys (rough guide)
Select common interface in your receivers menu to get to the stealth menu.
Select the keys option,
Select your current providers ID from the keylist (D+004101) highlight the keys you wish to update (00 or 01) and select ok to edit. Select hex or dec depending on the key format you are using,once you have entered your keys exit back to main screen.
I haven't got a receiver with a cam slot handy atm so these instructions are a rough guide from memory, but should give you the general idea.
Hope this helps,

Regards,
Ollie

 

[Mickha]

With Stealth 215 you do not need to enter keys, for D+, as it is auto updating.
If you open the read me file, contained in every new Stealth release, it will tell you what new channels, and features, are available, then you can decide if you wish to upgrade your Cams firmware, or not.

 

[georgewoods]

thanks for the good info

 

[harmoniko]

Hi slimsim,
the latest Stealth 215 now has D+ and Premiere AU.
If you want to keep Stealth 203 just update the Diablo keys.bin file or manually enter the last Premiere keys update.

Hello Mickha
Please help me.I've just bought the diablocam
If I use Stealth203 (manual keys) what is the optimal configuration about
Caids file
Auto Pmt
Emulators
Emulators Priority
Fixed CW
Smartcard Mess

Thank you a lot

 

[Mickha]

For the Cam to work you need to alter the configuration settings to have emulators set to ON.
You should upgrade to Stealth 215, as this is the latest Stelath file and has D+, Premiere, Polsat, TPS and Digi TV all Auto updating.
In the configuration menu try these settings:
Auto PMT ON
Emulators ON
Emulators Priority 1 Emu 2 Cards
Fixed CW OFF

 

[samedin]

might be a silly question, but does the Diablo work with Dreamboxes? Or is there a need for it if you have a dreambox?

 

[Llew]

It'll AU D+, which the Dreambox emus can't at present.

Llew

 

[harmoniko]

For the Cam to work you need to alter the configuration settings to have emulators set to ON.
You should upgrade to Stealth 215, as this is the latest Stelath file and has D+, Premiere, Polsat, TPS and Digi TV all Auto updating.
In the configuration menu try these settings:
Auto PMT ON
Emulators ON
Emulators Priority 1 Emu 2 Cards
Fixed CW OFF

OK, I've updated the Cam.I've inserted the cam to my receiver Hyunday dc300 C.I. and I've done your configuration but I've waited after 1-2 min and I don't see nothing. In channel like Digital+ Spain or Rai Africa- Asia (coded Biss) I'see 1 minute but not good quality (pixelled). For your experience what may be the problem?
Thanks

 

[Mickha]

Digital + does take up to 2 minutes to clear, but if you have the configurations set correctly you should be getting, Digital + and Premiere on 19E, TPS and Polsat on 13e, for TPS you need to leave your receiver tuned to France 4, or other channel using that frequency, until it clears and then browse the rest of the TPS package.
On 1W you can get Digi TV and on 30W Digital +.
Are you getting the card message appearing stating that the keys are expired?
Try switching to Sci Fi, or Playboy, turn off your receiver for a minute then turn it on and leave it for a few minutes.
If it still doesn't clear please double check the configuration settings.
If this isn't the problem try formatting your cam and re-loading stealth 215, please keep us updated on your progress.

 

[samedin]

It'll AU D+, which the Dreambox emus can't at present.

Llew

Thanks, is there a list of what channels it will open for the DB?

 

[harmoniko]

Digital + does take up to 2 minutes to clear, but if you have the configurations set correctly you should be getting, Digital + and Premiere on 19E, TPS and Polsat on 13e, for TPS you need to leave your receiver tuned to France 4, or other channel using that frequency, until it clears and then browse the rest of the TPS package.
On 1W you can get Digi TV and on 30W Digital +.
Are you getting the card message appearing stating that the keys are expired?
Try switching to Sci Fi, or Playboy, turn off your receiver for a minute then turn it on and leave it for a few minutes.
If it still doesn't clear please double check the configuration settings.
If this isn't the problem try formatting your cam and re-loading stealth 215, please keep us updated on your progress.

The problem persist. I go to France4 and to Digital+,Premiere but I don't see anything, all black!My receiver give me the message "scrambled channel".
May be the keys not update?

 

[Llew]

Thanks, is there a list of what channels it will open for the DB?

Digi TV 1W and D+ 30W channels can be found on the Lyngsat site.

 

[Mickha]

Did you format your cam, re-load Stealth 215 then alter the configuration settings?
Are you getting the smart card message stating the keys have expired?

 

[harmoniko]

Did you format your cam, re-load Stealth 215 then alter the configuration settings?
Are you getting the smart card message stating the keys have expired?

1)Yes, I've formatted the cam and re-load stealth 215 with your configuration

2) no, I've seen a message with "caids problem", what is this?

 

[Mickha]

This is a message you can get if the cam is not recognising the channels.
Try tuning into a D+ channel, like Sci Fi, switch off your receiver and remove the cam, turn on your receiver for a minute, then insert your cam, and leave it for a couple of minutes.
If you get the message keys expired leave it for a few minutes and it should decrypt.
Please post back with your progress.

 

[harmoniko]

This is a message you can get if the cam is not recognising the channels.
Try tuning into a D+ channel, like Sci Fi, switch off your receiver and remove the cam, turn on your receiver for a minute, then insert your cam, and leave it for a couple of minutes.
If you get the message keys expired leave it for a few minutes and it should decrypt.
Please post back with your progress.

Channel go clear for a short time but pixelled after that I've the message "No signal or PMT not found.Update file CAIDS.xml"

 

[Mickha]

I don't know which receiver you have but there is known problems with some Echostars and CAID's files.
There is a special Echo CAID you can load, but first try altering the CAID to Astra 1, just to see if that works, go into configuration, CAID's and select Astra 1.